Journal Articles

2021

  • K. McParland, Z. Larimore, P. Parsons, A. Good, J. Suarez and M. Mirotznik, “Additive Manufacture of Custom Radiofrequency Connectors”, IEEE Transactions on Components, Packaging and Manufacturing Technology, Vol 12, No. 1 December, 2021.
  • Faheem Muhammed, Tania Lavaggi, Suresh Advani, Mark Mirotznik and John W Gillespie, “Influence of material and process parameters on microstructure evolution during the fabrication of carbon-carbon composites: a review”, Journal of Material Science, Vol 56, August 2021.

2020

  • P. Parsons, Z. Larimore, A. Good, A. Clark, S. Gatley, J. Federici and M. Mirotznik, “Millimeter and Sub-millimeter Wave Electromagnetic Characterization of Additively Manufactured Zirconia Ceramics via NanoParticle Jetting”,  submitted to IEEE Transactions on Components, Packaging and Manufacturing Technology, Jan. 2020.
  • S. Biswas and M. Mirotznik, “High gain, wide-angle QCTO-enabled modified Luneburg lens antenna with broadband anti-reflective layer”, Nature Scientific Reports, Vol. 10, No. 1, 1-13, 2020.
  • B. Garrett, N. Hudak, M. Zablocki, T. Creazzo, A. Sharkawy, DG DeLacy and M. Mirotznik, “Hollow aluminum microspheres with high mass extinction coefficients in the long wave infrared”, JOSA A, Vol. 37, No. 12, 1989-1998, 2020.

2019

  • N. Hudak, B. Garrett, B. DeLacy and M.S Mirotznik, “Iterative Design of Multilayered Dielectric Microspheres with Tunable Transparency Windows”, Journal of the Optical Society of America A, 36 (5), 705-715, 2019.
  • J. Deroba, A. Good, K. Sobczak, Z. Larimore and M.S. Mirotznik, “Additively Manufactured Luneburg Retroreflector”, submitted to IEEE Transactions on Aerospace and Electronic Systems, Jan. 2019
  • A. J. Good, J. Suarez, R. Martin, Z. Larimore, P. Parsons, N. Hudak and M.S. Mirotznik, “Low cost platform for passive imaging of RF emitters using Luneburg lenses”, submitted to IEEE Electronic Letters, March 2019.
  • P Parsons, Z Larimore, F Muhammed, M Mirotznik, “Fabrication of low dielectric constant composite filaments for use in fused filament fabrication 3D printing”, Additive Manufacturing, Vol 30, December 2019.
  • S. Simmons, B. Good and M.S. Mirotznik, ”Analysis of Electromagnetic Scattering from a Woven Composite Fabric”, submitted to Composites Part B, April 2019.
  • S. Simmons, B. Good and M.S. Mirotznik, ”Validation of Maxwell Garnett’s Effective Media Formula for Multiphase Dielectric Mixtures”, submitted to IEEE Antennas and Wireless Propagation Letters, April 2019.
  • Simmons, B. Good and M.S. Mirotznik, ”Generalized Analytic Approach for Oblique Scattering of an Arbitrary Arrangement of Multiple N-Layered Cylinders”, submitted to Waves in Radom and Complex Media, April 2019.
  • N. Hudak, P. Parsons, Z. Larimore, B. Garrett, G. DeLacy, A. Good and M.S. Mirotznik, ”Hybrid Design of Wideband Optically Transparent EMI Shielding”, submitted to JOSA A, June 2019.

2018

  • Z. Quan, J. Yu, X. Qin, J. Suhr, C. Cotton, M.S. Mirotznik, T. Chou, “Printing direction dependence of mechanical behavior of additively manufactured 3D preforms and composites”, Composite Structures, No. 184, Jan 2018, pp. 917-923.
  • Z. Larimore, S. Jensen, A. Good, J. Suarez and M.S. Mirotznik, “Additive Manufacturing of Luneburg Lens Antennas Using Space-Filling Curves and Fused Filament Fabrication”, IEEE Transactions on Antennas and Propagation, Vol. 66, No. 6, June 2018, pp. 2818-2827.
  • N. Gupta and M.S. Mirotznik, “Performance characterization of tunable longwave infrared notch filters using quantum cascade lasers”, Optical Engineering, Vol. 57, No. 12, December 2018.
  • S. Biswas, A. Lu, Z. Larimore, P. Parsons, A. Good, N. Hudak, B. Garrett, J. Suarez and M.S. Mirotznik, “Realization of Modified Luneburg Lens Antenna using Quasi-Conformal Transformation Optics and Additive Manufacturing”, Microwave and Optical Technology Letters, Wiley on-line, December 2018.

2017

  • Z. Larimore, P. Parsons, S. Jensen, B. Good, K. Smith and M.S. Mirotznik, “Use of Space-Filling Curves for Additive Manufacturing of Three Dimensionally Varying Graded Dielectric Structures Using Fused Deposition Modeling”, Additive Manufacturing, No. 15 March 2017, pp. 48-56.
  • A. Good, D. Roper, B. Good, S. Yarlaggada and M.S. Mirotznik, “Multifunctional Graded Dielectrics Fabricated using Dry Powder Printing”, Smart Materials and Structures, June 2017.
  • V. Carey and M.S. Mirotznik, “Multi-band absorbers for the long-wave infrared regime”, Applied Optics, Vol. 56, No. 30, October 2017, pp. 8403-8413.
  • B. Debbrecht, M. McElhiney, V. Carey, C. Cullen, M.S. Mirotznik and B. DeLacy, “Cavity-based Aluminum nanohole arrays with tunable infrared resonances”, Optics Express, Vol 25, No. 20, October 2017, pp. 24501-24511.

2016

  • P. Ransom, Z. Larimore, S. Jensen and M.S. Mirotznik, “Fabrication of Wideband Antireflective Coatings using Fused Deposition Modeling”, IEEE Electronics Letters, Vol 52, No. 5, March 2016, pp. 352-354.
  • Z. Quan, Z. Larimore, A. Wu, J. Yu, X. Qin, M.S. Mirotznik, J. Suhr, J. Byun, Y. Oh, T. Chou, “Microstructural design and additive manufacturing and characterization of 3D orthogonal short carbon fiber/acrylonitrile-butadiene- styrene preform and composite”, Composites Science and Technology, Vol. 126, April 2016, pp. 139-148.
  • Z. Quan, Z. Larimore, X. Qin, J. Yu, M.S. Mirotznik, J. Byun, Y. Oh, T. Chou, “Microstructural characterization of additively manufactured multi-directional preforms and composites via X-ray micro-computed tomography”,  Composites Science and Technology, Jun 2016.
  • B. Good, S. Simmons and M.S. Mirotznik, “General optimization of tapered anti-reflective coatings “, Optics Express, Vol 24, No. 15,  July 2016, pp. 16618-16629.

2015

  • P. Pa, R. McCauley, Z. Larimore, M. Mills, S. Yarlagadda and M.S. Mirotznik, ‘High Frequency Characterization of Conductive Inks Embedded within a Structural Composite’, IOP Smart Materials and Structures, Vol 24, No. 6, June 2015
  • P. Pa, Z. Larimore, P. Parsons and M.S. Mirotznik, ‘Multi-material additive manufacturing of embedded low-profile antennas’, IEEE Electronics Letters, Vol. 15, No. 20, October 2015
  • B. Good, D. Roper, S. Simmons and M.S. Mirotznik, “Design and Fabrication of Microwave Flat Lenses using a Novel Dry Powder Dot Deposition System”, IOP Smart Materials and Structures, No. 24, October 2015
  • B. Good, S. Simmons and M.S. Mirotznik, “Design of Anti-reflection Grading using Magneto-dielectric Materials”, IEEE Transactions on Antennas and Propagation, Vol. 63, No. 11, November 2015

2014

  • I. McMichael, A. Zaghloul and M.S. Mirotznik, ‘Annular Slot Loaded High-Impedance Ground Plane’, IEEE Trans on Antennas and Propagation, Vol. 62, No. 4, April 2014, pp. 2063-2070
  • T. Miller, O. Kilic and M.S. Mirotznik, ‘Antenna Cross Polarization Isolation and Calibration of Hybrid-Polarization Radars’, IEEE Antennas and Wireless Propagation Letters, Vol. 12, December 2013, pp. 1200-1203
  • D. Roper, B. Good, R. McCauley, S. Yarlagadda, J. Smith, A. Good and M.S. Mirotznik, ‘Additive Manufacturing of Graded Dielectrics’, IOP Smart Materials and Structures, Vol. 23, No. 4, April 2014 (featured article).

2013

  • I. McMichael, A. Zaghloul and M.S. Mirotznik, ‘A Method for Determining Optimal EBG Reflection Phase for Low Profile Dipole Antennas’, IEEE Trans on Antennas and Propagation, Vol. 61, No. 5, May 2013, pp. 2411-2417. 
  • G. Behrmann, J. Hidler and M.S. Mirotznik, ‘Fiber Optic Micro Sensor for the Measurement of Tendon Forces’, Biomedical Engineering On-Line, Vol. 11, No. 77, 2013, pp.1-16
  • I. McMichael, E. Nallon, V. Schnee, W. Scott and M.S. Mirotznik, ‘EBG Antenna for GPR Co-Located with a Metal Detector for Landmine

2012

  • M.S. Mirotznik, S. Yarlagadda, R. McCauley and P. Pa, ‘Broadband Electromagnetic Modeling of Woven Fabric Composites’, IEEE Microwave Theory and Techniques, Vol. 60, No. 1, January 2012, pp. 158-169
  • M.S. Mirotznik, W. Beck, K. Olver, J. Little and P. Pa, ‘Passive Infrared Sensing using Plasmonic Resonant Dust Particles’, International Journal of Optics, Vol. 2012, Article ID 651563, pp. 1-8
  • B. Good, P. Ransom, S. Simmons, A. Good and M.S. Mirotznik, ‘Design of Graded Index Flat Lenses with Integrated Antireflective Properties’, Microwave and Millimeter wave Technology Letters, Vol. 54, No. 12, December 2012, pp. 2774-2781. 

2011

  • O. Kilic, M. Huang, C. Conner and M.S. Mirotznik, ‘Hardware accelerated Design of Millimeter Wave Antireflective Surfaces: A Comparison of Field-Programmable Gate Array (FPGA) and Graphics Processing Unit (GPU) Implementations’, ACES Journal, Vol. 26, No. 3. March 2011, pp. 188-198 

2010

  • M.S. Mirotznik, B. Good, P. Ransom, D. Wikner and J.N. Mait, ‘Iterative Design of Moth-Eye Antireflective Surfaces at Millimeter Wave Frequencies’, Microwave and Millimeter wave Technology Letters, Vol. 52, No. 3, March 2010, pp. 561-568
  • M.S. Mirotznik, B. Good, P. Ransom, D. Wikner and J.N. Mait, ‘Broadband Antireflective Properties of Inverse Motheye Surfaces’, IEEE Trans on Antennas and Propagation, Vol. 58, No. 9, September 2010, pp. 2969-2980 (This paper was awarded the Wheeler Prize as the best applied paper of 2010 in IEEE Antennas and Propagation)

Contact Us:  Professor Mark Mirotznik

email: mirotzni@udel.edu

tel: (301)873-7029

mailing address:  139 The Green, Newark DE, 19716

Print Friendly, PDF & Email