Research Publications
BOOKS
1.S. G. Advani and Murat Sozer “Process Modeling in Composite Manufacturing”, (2nd Edition) CRC press ( 2010).
2. “Processing and Properties of Nanocomposites“, Edited by Suresh G. Advani, World Scientific Publishing Company (USA) (2007).
3. Advanced Polymeric Materials: Structure Property Relationship, Editors, Dr. Gabriel O. Shonaike and S.G. Advani Technomics (USA) (2003)
4. S. G. Advani and Murat Sozer “Process Modeling in Composite Manufacturing”, Marcel Dekker, Inc., 270 Madison Ave., NY, NY 10016, ( 2002).
5. S. G. Advani, Editor, Flow and Rheology in Polymeric Composites Manufacturing, Elsevier Publishers, Amsterdam (1994)
BOOK CHAPTERS
21.Chapter 8 – Advanced High Resolution Characterization Techniques for Degradation Studies in Fuel Cells, Pages 365-421, Feng-Yuan Zhang, Suresh G. Advani, Ajay K. Prasad in Polymer electrolyte Fuel Cell Degradation
20. Suresh Advani and Zhihang Fan, “Chapter 2: Dispersion, Bonding and Orientation of Carbon Nanotubes in Polymer Matrices,” in “Processing and Properties of Nanocomposites“, Edited by Suresh G. Advani, World Scientific Publishing Company (USA) (2007) pp.61-98.
19. S.G. Advani and K-T. Hsiao, “Transport Phenomena in Liquid Composites Molding Processes and their Roles in Process
Control and Optimization”, Chapter 14 in Handbook of Porous Media, Edited by Dr. Kambiz Vafai, Published by Marcel Dekker, Inc., 270 Madison Ave., NY, NY 10016 (2005).
18.A. Gokce and S. G. Advani, ” Modeling, Optimization and Control of Resin Flow During Manufacturing of Textile Composites with Liquid Molding” Design and manufacture of textile composites, Edited by Andrew Long,Woodhead Publishing Limited, Cambridge, UK (2005)
17. V. Antonucci, K. T.. Hsiao and S. G. Advani, “Review of Polymer Composites with Carbon Nanotubes”, Advaned Polymeric Materials, Structure Property Relationship, Edited by G. Shonaike and S. G. Advani, CRC press, pp397-438(2003)
16. S. G. Advani and Dimitrovova, Role of Capillary Driven Flow in Composites Manufacturing, Surface and Interfacial Tension: Measurement, Theory and Applications, Editor: Stanley Hartland, Surfactant Science Series Volume 119, pp. 263-312 Marcel and Dekkar, (2004).
15. S.G. Advani and E.M. Sozer Chapter 2.23: Resin impregnation in liquid molding processes, Comprehensive Composite Materials, Editors-in-Chief A. Kelly, pp.808-890, Elsevier Science (2001).
14. S.G. Advani and E.M. Sozer Process Modeling and Optimization (article 4B), ASM International’s Engineered Materials Handbook. Vol. 21: Composites, pp. 423-433 ASM International, Ohio (2001).
13. S.G. Advani and K-T. Hsiao, “Heat Transfer During Mold Filling in Liquid Composite Manufacturing”, Chapter 19 in Handbook of Porous Media, Edited by Dr. Kambiz Vafai, 845-891Published by Marcel Dekker, Inc., 270 Madison Ave., NY, NY 10016 (2000).
12. Veronica Calado and S. G. Advani, “Theromosett Resin Cure Kinetics and Rheology” (pp.31-105) in Transport Processes in Composites. Edited by A. Loos and Raju Dave. (2000).
11. S. G. Advani and Pavel Simacek “Modeling and Simulation of Flow, Heat Transfer and Cure” (pp.225-281) in Resin Transfer Molding For Aerospace Structures, Edited by Teresa Krukenberg and Rowan Paton, Kluwer Academic Publishers, Netherlands, (1999).
10. S. G. Advani and Terry S. Creasy, “Rheology of Long Discontinuous Fiber Thermoplastic Composites” (pp. 843-892) in Advances in the Flow and Rheology of Non-Newtonian Fluids, Edited by D. A. Siginer, D.De Kee and R.P. Chhabra, Elsevier Publishers (1999).
9. Advani S. G. and Lihwa Fong, “Resin Transfer Molding” to appear in Lubin’s Handbook of Composites II, Edited by S.T. Peters (1997).
8. Advani S. G. and S. Ranganathan, “Chapter 2: Fiber-Fiber and Fiber-Wall Interactions During the Flow of Non-Dilute Suspensions” (pp. 43-76) in Flow Induced Alignment in Composite Materials, Edited by D. C. Guell and T. D. Papathanasiou, Woodhead Publishing Ltd., Cambridge, England (1997).
7. Advani, Suresh G., Stephen Shuler and Terry Creasy, “Chapter 8: Rheology of Long Fiber Composites in Sheet Forming” (pp. 323-370) in Sheet Forming of Composites, Edited by Debes Bhattacharrya, Elsevier Publishers, Amsterdam (1997).
6. Advani S. G., “Chapter 1: Introduction (pp. 1-8) in Flow and Rheology in Polymeric Composites Manufacturing, Edited by Suresh G. Advani, Elsevier Publishers, Amsterdam (1994).
5. Tucker C. L. III and S. G. Advani, “Chapter 6: Processing of Short Fiber Systems” (pp. 147-202) in Flow and Rheology in Polymeric Composites Manufacturing, Edited by Suresh G. Advani, Elsevier Publishers, Amsterdam (1994).
4. Lin, H. H., S. Ranganathan and S. G. Advani,” Consolidation in Continuous Fiber Systems” (pp. 325-360) in Flow and Rheology in Polymeric Composites Manufacturing, Edited by Suresh G. Advani, Elsevier Publishers, Amsterdam (1994).
3. Advani S. G., M. V. Bruschke and R. Parnas, “Chapter 12: Resin Transfer Molding” (pp. 465-516) in Flow and Rheology in Polymeric Composites Manufacturing, Edited by Suresh G. Advani, Elsevier Publishers, Amsterdam (1994).
2. Advani S. G., “Chapter 10: Growth and Collapse of Bubbles in Viscoelastic Fluids” in Advances in Transport Processes, Vol. IX, pp. 445-500, Edited by R. A. Mashelkar and A. Muzumdar (1994).
1. Advani, S. G., “Molding of Short Fiber Composites: Flow Processing” International Encyclopedia of Composites, Vol. III, Edited by Struat Lee, p.514-526, VCH Publishers (1990).
JOURNAL ARTICLES
2020 (372-374)
374. P Šimáček, SG Advani “ A continuum approach for consolidation modeling in composites processing” – Composites Science and Technology, 2020
373. M Yun, CA Martin, P Giormini, F Chinesta, S Advani “ Learning the Macroscopic Flow Model of Short Fiber Suspensions from Fine-Scale Simulated Data”- Entropy, 2020
372. M Hancioglu, EM Sozer, SG Advani “Comparison of in-plane resin transfer molding and vacuum-assisted resin transfer molding ‘effective’ permeabilities based on mold filling experiments and simulations” – Journal of Reinforced Plastics and Composites, 2020
2019 (357-371)
371. H Yu, J Sun, D Heider, S Advani “Experimental investigation of through-thickness resistivity of unidirectional carbon fiber tows” – Journal of Composite Materials, 2019
370. Y Wang, SJ Moura, SG Advani, AK Prasad “Optimization of powerplant component size on board a fuel cell/battery hybrid bus for fuel economy and system durability” – International Journal of Hydrogen Energy, 2019
369. David May, A Aktas, SG Advani, DC Berg, A Endruweit, E Fauster, SV Lomov, A Long, P Mitschang, S Abaimov, D Abliz, I Akhatov, MA Ali, TD Allen, S Bickerton, M Bodaghi, B Caglar, H Caglar, A Chiminelli, N Correia, B Cosson, M Danzi, J Dittmann, P Ermanni, G Francucci, A George, V Grishaev, M Hancioglu, MA Kabachi, K Kind, M Deléglise-Lagardère, M Laspalas, OV Lebedev, M Lizaranzu, P-J Liotier, P Middendorf, J Morán, C-H Park, RB Pipes, MF Pucci, J Raynal, ES Rodriguez, R Schledjewski, R Schubnel, N Sharp, G Sims, EM Sozer, P Sousa, J Thomas, R Umer, W Wijaya, B Willenbacher, A Yong, S Zaremba, G Ziegmann “In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exercise” Composites Part A: Applied Science and Manufacturing, Vol 121, Pages 100-114, 2019
368. D Mezi, G Ausias, SG Advani, J Férec “Fiber suspension in 2D nonhomogeneous flow: The effects of flow/fiber coupling for Newtonian and power-law suspending fluids”, – Journal of Rheology, 2019
367. L Wang, W Zheng, AK Prasad, SG Advani, DG Vlachos “Transition metal catalyst nanoparticles and uses thereof” – US Patent App. 16/094,631, 2019
366. H Yu, S Advani, D Heider :Impact of resin-rich layer on the through-thickness resistivity of carbon fiber reinforced polymers” – Journal of Composite Materials, 2019
365. Y Wang, SJ Moura, SG Advani, AK Prasad “Power management system for a fuel cell/battery hybrid vehicle incorporating fuel cell and battery degradation” – International Journal of Hydrogen Energy, 2019
364. M Bodaghi, SV Lomov, P Simacek, NC Correia, SG Advani, “On the variability of permeability induced by reinforcement distortions and dual scale flow in liquid composite moulding: A review”, Composites Part A: Applied Science and Manufacturing, 2019
363. Mayur G Godbole, Rahul Purandare, Rahul Harshe, Avinash Hood, Suhasini Gururaja, Makarand Joshi, Suresh Advani, “Influence of filament distribution on transverse tow permeability: Model predictions and experimental validation”, Composites Part A: Applied Science and Manufacturing, 2019
362. Ffion A Martin, Nicholas A Warrior, Pavel Simacek, Suresh Advani, Adrian Hughes, Roger Darlington, Eissa Senan, “Simulation and validation of injection-compression filling stage of liquid moulding with fast curing resins” Applied Composite Materials, Vol 26, Issue 1, Pages 41-63, 2019
361. M Bodaghi, P Simacek, N Correia, SG Advani “Experimental parametric study of flow‐induced fiber washout during high‐injection‐pressure resin transfer molding” – Polymer Composites, 2019
360. Navid Niknafs Kermani, Pavel Simacek, Suresh G Advani, “A Model for the Equilibrated Co-Cure of Honeycomb Core Sandwich Structures in Autoclave Processing” Proceedings of the American Society for Composites—Thirty-fourth Technical Conference, 2019
359. HS Sas, P Simacek, SG Advani “A METHODOLOGY TO CHARACTERIZE FIBER PREFORM PERMEABILITY BY USING KARDAR–PARISI–ZHANG EQUATION”, – Journal of Porous Media, 2019
358. C Ghnatios, P Simacek, F Chinesta, S Advani “A non-local void dynamics modeling and simulation using the Proper Generalized Decomposition”- International Journal of Material Forming, 2019
357. Bamdad Barari, Pavel Simacek, Shridhar Yarlagadda, Roger M Crane, Suresh G Advani “Prediction of process-induced void formation in anisotropic Fiber-reinforced autoclave composite parts” – International Journal of Material Forming, 2019
2018 (341-356)
356. NA Siddig, C Binetruy, E Syerko, P Simacek, S Advani “A new methodology for race-tracking detection and criticality in resin transfer molding process using pressure sensors” – Journal of Composite Materials, 2018
355. M Yun, E Lopez, F Chinesta, S Advani “Manifold embedding of heterogeneity in permeability of a woven fabric for optimization of the VARTM process” – Composites Science and Technology, 2018
354. MJ Parnian, S Rowshanzamir, AK Prasad, SG Advani “Effect of ceria loading on performance and durability of sulfonated poly (ether ether ketone) nanocomposite membranes for proton exchange membrane fuel cell applications” – Journal of membrane science, 2018
353. SP Bancora, C Binetruy, SG Advani, E Syerko…”Effective permeability averaging scheme to address in-plane anisotropy effects in multi-layered preforms” – Composites Part A: Applied Science and Manufacturing, 2018
352. M Bodaghi, P Simacek, SG Advani, NC Correia “A model for fibre washout during high injection pressure resin transfer moulding” – Journal of Reinforced Plastics and Composites, 2018
351. P Simacek, SG Advani “Resin flow modeling in compliant porous media: an efficient approach for liquid composite molding” – International Journal of Material Forming, 2018
350. MJ Parnian, S Rowshanzamir, AK Prasad, SG Advani “High durability sulfonated poly (ether ether ketone)-ceria nanocomposite membranes for proton exchange membrane fuel cell applications” – Journal of membrane science, 2018
349. M Yun, P Simacek, C Binetruy, S Advani “Random field generation of stochastically varying through the thickness permeability of a plain woven fabric” – Composites Science and Technology, 2018
348. G Sorba, C Binetruy, E Syerko, A Leygue, S Comas-Cardona, JP-H Belnoue, OJ Nixon-Pearson, DS Ivanov, SR Hallett, SG Advani, “Multi-scale modelling of non-uniform consolidation of uncured toughened unidirectional prepregs”, – AIP Conference Proceedings, 2018
347. J Wang, P Simacek, N Gupta, SG Advani “Multidisciplinary tool for composite wind blade design & analysis” – Composites Part B: Engineering, 2018
346. DA Brunner, M Bajpai, JAC Kinzey, S Marcks, S Advani, A Prasad “DEVICES, SYSTEMS, AND METHODS FOR VARIABLE FLOW RATE FUEL EJECTION”, … – US Patent App. 15/565,720, 2018
345. Adrien Scheuer, Amine Ammar, Emmanuelle Abisset-Chavanne, Elías Cueto, Francisco Chinesta, Roland Keunings, Suresh G Advani “Data-driven upscaling of orientation kinematics in suspensions of rigid fibres” – Tech Science Press, 2018
344. MD Lindemer, SG Advani, AK Prasad “Lattice Boltzmann Simulation of a Gas-to-Solid Reaction and Precipitation Process in a Circular Tube”- Computer Modeling in Engineering & Sciences, 2018
343. NN Kermani, P Simacek, M Erdal, SG Advani “A Numerical Model to Simulate Void Dynamics During Processing of Honeycomb Core Sandwich Structures with Prepreg Face-Sheets” – Proceedings of the American Society for Composites and Manufacturing, 2018
342. H YU, D HEIDER, S ADVANI “Micro-Mechanics Based Modeling of Joule Heating Induced Damage Propagation in Carbon Composite Laminates” – Proceedings of the American Society for Composites, Thirty-Third Technical Conference, 2018
341. P Šimáček, SG Advani “A micromechanics model to predict extensional viscosity of aligned long discontinuous fiber suspensions” – International Journal of Material Forming, 2018
2017 (325-340)
340. M Yun, T Carella, P Simacek, S Advani “Stochastic modeling of through the thickness permeability variation in a fabric and its effect on void formation during Vacuum Assisted Resin Transfer Molding” – Composites Science and Technology, 2017
339. Weiqing Zheng, Liang Wang, Fei Deng, Stephen A Giles, Ajay K Prasad, Suresh G Advani, Yushan Yan, Dionisios G Vlachos “Durable and self-hydrating tungsten carbide-based composite polymer electrolyte membrane fuel cells, – Nature communications, 2017
338. Andrew M Baker, Siddharth Komini Babu, Stefan Williams, Rangachary Mukundan, Elizabeth J Judge, Dusan Spernjak, Suresh G Advani, Ajay K Prasad, Rod L Borup “Migration and Stabilization of Radical Scavengers in PEFCs”- Meeting Abstracts, 2017
337. AM Baker, JH Dumont, R Mukundan, SG Advani… “The Effects of Cerium Migration on PEM Fuel Cell Performance”- ECS Transactions, 2017
336. L Wang, SG Advani, AK Prasad “Self-Healing Composite Membrane for Proton Exchange Membrane Fuel Cell Applications”- ECS Transactions, 2017
335. John J Gangloff Jr, Thomas A Cender, Volkan Eskizeybek, Pavel Simacek, Suresh G Advani “Entrapment and venting of bubbles during vacuum bag prepreg processing” – Journal of Composite Materials, 2017
334. Douglas Brunner, Manish W Bajpai, John Adam C Kinzey, Shane Marcks, Ajay K Prasad, Suresh G Advani “Devices, systems, and methods for variable flow rate fuel ejection”, – US Patent 9,719,529, 2017
333. L Wang, AK Prasad, SG Advani, WB Johnson “Self-healing membranes for polymer electrolyte applications” – US Patent App. 15/500,554, 2017
332. M Yun, H Sas, P Simacek, SG Advani “Characterization of 3D fabric permeability with skew terms” – Composites Part A: Applied Science and Manufacturing, 2017
331. J Wang, P Simacek, SG Advani “Use of medial axis to find optimal channel designs to reduce mold filling time in resin transfer molding” – Composites Part A: Applied Science and Manufacturing, 2017
330. MD Lindemer, SG Advani, AK Prasad “Experimental investigation of heterogeneous hydrolysis with Zn vapor under a temperature gradient”- International Journal of Hydrogen Energy, 2017
329. M Yeager, P Simacek, SG Advani “Role of fiber distribution and air evacuation time on capillary driven flow into fiber tows”, – Composites Part A: Applied Science and Manufacturing, 2017
328. H Heidary, MJ Kermani, AK Prasad, SG Advani… “Numerical modelling of in-line and staggered blockages in parallel flowfield channels of PEM fuel cells” – International journal of hydrogen energy, 2017
327. Andrew M Baker, Siddharth Komini Babu, Rangachary Mukundan, Suresh G Advani, Ajay K Prasad, Dusan Spernjak, Rod L Borup “Cerium ion mobility and diffusivity rates in perfluorosulfonic acid membranes measured via hydrogen pump operation” – Journal of The Electrochemical Society, 201
326. Andrew M Baker, Stefan TD Williams, Rangachary Mukundan, Dusan Spernjak, Suresh G Advani, Ajay K Prasad, Rod L Borup “Zr-doped ceria additives for enhanced PEM fuel cell durability and radical scavenger stability”, – Journal of Materials Chemistry A, 2017
325. J Wang “Integration of composite part design and processing simulation in liquid composite molding” – 2017
2016 (324-313)
324. Baker AM, R Mukundan, D Spernjak, SG Advani, AK Prasad, RL Borup, “Cerium migration in polymer electrolyte membranes,” ECS Transactions 75 (14), 707-714, 2016
323. Cender TA, Simacek P, Davis S, Advani SG. “Gas Evacuation from Partially Saturated Woven Fiber Laminates. Transp Porous Media” 2016;115:541-62.
322. Ghnatios C, Abisset-Chavanne E, Binetruy C, Chinesta F, Advani S. “3D modeling of squeeze flow of multiaxial laminates”. J Non Newtonian Fluid Mech 2016;234:188-200.
321. Heidary H, Kermani MJ, Advani SG, Prasad AK. “Experimental investigation of in-line and staggered blockages in parallel flowfield channels of PEM fuel cells”. Int J Hydrogen Energy 2016;41:6885-93.
320. Lindemer MD, Advani SG, Prasad AK. “Hydrogen production via the heterogeneous hydrolysis of Zn vapor under a temperature gradient: Modeling and efficiency analysis”. Int J Hydrogen Energy 2016;41:10557-67.
319. Simacek P, Advani SG. “Equivalent” permeability and flow in compliant porous media”. Composites Part A-Applied Science and Manufacturing 2016;80:107-10.
318. Simacek P, Merotte J, Advani SG. “Compression Resin Transfer Molding Simulation for Net Shape Manufacturing of Composite Structures for Automotive Applications”. SAMPE J 2016;52:19-29.
317. Wang J, Simacek P, Advani SG. “Use of Centroidal Voronoi Diagram to find optimal gate locations to minimize mold filling time in resin transfer molding”. Composites Part A-Applied Science and Manufacturing 2016;87:243-55.
316. Wang L, Advani SG, Prasad AK. “Self-Healing Composite Membrane for Proton Electrolyte Membrane Fuel Cell Applications”. J Electrochem Soc 2016;163:F1267-71.
315. Yeager M, Hwang WR, Advani SG. “Prediction of capillary pressure for resin flow between fibers”. Composites Sci Technol 2016;126:130-8.
314. JJ Gangloff Jr, TA Cender, V Eskizeybek, P Simacek, SG Advani, “Entrapment and venting of bubbles during vacuum bag prepreg processing”, Journal of Composite Materials, 0021998316676325, October-25-2016
313. AM Baker, R Mukundan, D Spernjak, EJ Judge, SG Advani, AK Prasad, “Cerium migration during PEM fuel cell accelerated stress testing”. Journal of The Electrochemical Society 163 (9), F1023-F1031, 2016
2015 (292-312)
312. P Simacek, SG Advani, “Equivalent permeability and flow in compliant porous media” , Composites Part A: Applied Science and Manufacturing 80, 107-110 (2016).
311. H Yu, D Heider, SG Advani, ”A 3D microstructure based resistor network model for the electrical resistivity of unidirectional carbon composites,” Composite Structures 134, 740-749 (2015).
310. M Kubota, AK Prasad, JM Deitzel, EWH Teather, SG Advani, “Thin polymeric film microstructure manipulation for diffused reflectance applications”, Polymer Engineering & Science 55 (12), 2878-2883 (2015).
309. H Yu, D Heider, SG Advani, “Comparison of two finite element homogenization prediction approaches for through thickness thermal conductivity of particle embedded textile composites” , Composite Structures 133, 719-726 (2015).
308. M Yeager, SG Advani, “Numerical model of fiber wetting with finite resin volume”, Integrating Materials and Manufacturing Innovation 4 (1), 1-16 (2015).
307.HS Sas, P Šimáček, SG Advani, “A methodology to reduce variability during vacuum infusion with optimized design of distribution media,” Composites Part A: Applied Science and Manufacturing 78, 223-233 (2015).
306.Y Wang, L Wang, SG Advani, AK Prasad, “Double-layer gas diffusion media for improved water management in polymer electrolyte membrane fuel cells”, Journal of Power Sources 292, 39-48 (2015).
305. AM Baker, D Torraco, EJ Judge, D Spernjak, R Mukundan, RL Borup , SG Advani and AK Pasad, “Cerium migration during PEM fuel cell assembly and operation”, ECS Transactions 69 (17), 1009-1015 ( 2015).
304. H Yu, D Heider, SG Advani, “Prediction of effective through-thickness thermal conductivity of woven fabric reinforced composites with embedded particles”, Composite Structures 127, 132-140 (2015).
303. FC Cetinbas, SG Advani, AK Prasad, “Optimization of polymer electrolyte membrane fuel cell catalyst layer with bidirectionally-graded composition”, Electrochimica Acta 174, 787-798 (2015).
302. EE Koepf, SG Advani, AK Prasad, A Steinfeld, “Experimental Investigation of the Carbothermal Reduction of ZnO Using a Beam-Down, Gravity-Fed Solar Reactor,” Industrial & Engineering Chemistry Research 54 (33), 8319-8332 (2015).
301. GS Kelly, SG Advani, JW Gillespie Jr, “A model to describe stick–slip transition time during ultrasonic consolidation,” The International Journal of Advanced Manufacturing Technology 79, 1931-1937 (2015).
300. J Wang, P Simacek, SG Advani, “Fast Mold Filling Simulation Based on the Geodesic Distance Calculation Algorithm for Liquid Composite Molding Processes,” CMES: Computer Modeling in Engineering & Sciences 107 (1), 59-79 (2015).
299. H Yu, D Heider, SG Advani, “Role of in-plane stacking sequence on transverse effective thermal conductivity of unidirectional composite laminates” , International Journal of Heat and Mass Transfer 85, 897-903 (2015).
298. P Simacek, SG Advani, “Simulating tape resin infiltration during thermoset pultrusion process,”Composites Part A: Applied Science and Manufacturing 72, 115-126 (2015).
297. JJ Gangloff, WR Hwang, SG Advani, “The investigation of bubble mobility in channel flow with wavy porous media walls,” International Journal of Multiphase Flow 70, 1-14 (2015).
296. MD Lindemer, SG Advani, AK Prasad, “Graetz–Brinkman problem in laminar core-annular flow of two immiscible liquids,” International Journal of Thermal Sciences 89, 362-371 (2015).
295.S Bhargava, M Kubota, RD Lewis, SG Advani, AK Prasad, JM Deitzel, “Ultraviolet, water, and thermal aging studies of a waterborne polyurethane elastomer-based high reflectivity coating,” Progress in Organic Coatings 79, 75-82 (2015).
294. L Wang, J Kang, JD Nam, J Suhr, AK Prasad, SG Advani, “Composite Membrane Based on Graphene Oxide Sheets and Nafion for Polymer Electrolyte Membrane Fuel Cells”, ECS Electrochemistry Letters 4 (1), F1-F4 (2015).
293. Simacek, P.; Merotte, J.; Advani, S. G , “Compression Resin Transfer Molding Simulation for Net Shape Manufacturing of Composite Structures for Automotive Applications” , SAMPE JOURNAL Volume: 52 Issue: 1 Pages: 19-29 Published: JAN-FEB 2016
292. Cender, Thomas A. Šimacek, Pavel; Advani, Suresh G. “A method to determine open pore volume with pulse decay,” Applied Physics Letters, v 105, n 13, September 29, 2014.
2014 (272-291)
291. Cetinbas, Firat C. , Advani, Suresh G.; Prasad, Ajay K. “An improved agglomerate model for the pem catalyst layer with accurate effective surface area calculation based on the sphere-packing approach,” Journal of the Electrochemical Society, v 161, n 6, p F803-F813, 2014
290. Yu, Hang , Nonn, Andreas; Heider, Dirk; Advani, Suresh “Model-based characterization and enhancement of the through-thickness thermal conductivity of polymer composites using infrared camera,” International Journal of Thermal Sciences, v 80, n 1, p 118-125, June 2014
289. Kelly, Gregory S. , Just Jr., M. Scott; Advani, Suresh G.; Gillespie Jr., John W. “Energy and bond strength development during ultrasonic consolidation,” Journal of Materials Processing Technology, v 214, n 8, p 1665-1672, August 2014
288. Cetinbas, Firat C. , Advani, Suresh G.; Prasad, Ajay K. “Three dimensional proton exchange membrane fuel cell cathode model using a modified agglomerate approach based on discrete catalyst particles,” Journal of Power Sources, v 250, p 110-119, 2014
287. Gangloff Jr., John J. , Simacek, Pavel; Sinha, Shatil; Advani, Suresh G., “ A process model for the compaction and saturation of partially impregnated thermoset prepreg tapes,” Composites Part A: Applied Science and Manufacturing, v 64, p 234-244, September 2014
286. Lugo, J. , Simacek, P.; Advani, S.G. “Analytic method to estimate multiple equivalent permeability components from a single rectilinear experiment in liquid composite molding processes,” Composites Part A: Applied Science and Manufacturing, v 67, p 157-170, December 2014
285. Wang, Hui ,Prasad, Ajay K.; Advani, Suresh G. “Accelerating hydrogen absorption in a metal hydride storage tank by physical mixing” International Journal of Hydrogen Energy, v 39, n 21, p 11035-11046, July 15, 2014
284. Vernet, N. , Ruiz, E.; Advani, S.; Alms, J.B.; Aubert, M.; Barburski, M.; Barari, B.; Beraud, J.M.; Berg, D.C.; Correia, N.; Danzi, M.; Delavière, T.; Dickert, M.; Di Fratta, C.; Endruweit, A.; Ermanni, P.; Francucci, G.; Garcia, J.A.; George, A.; Hahn, C.; Klunker, F.; Lomov, S.V.; Long, A.; Louis, B.; Maldonado, J.; Meier, R.; Michaud, V.; Perrin, H.; Pillai, K.; Rodriguez, E.; Trochu, F.; Verheyden, S.; Weitgrefe, M.; Xiong, W.; Zaremba, S.; Ziegmann, G. “Experimental determination of the permeability of engineering textiles: Benchmark II” Composites Part A: Applied Science and Manufacturing, v 61, p 172-184, June 2014
283. Sas, Hatice S. , Wurtzel, Eric B.; Simacek, Pavel; Advani, Suresh G. “. Effect of relative ply orientation on the through-thickness permeability of unidirectional fabrics” Composites Science and Technology, v 96, p 116-121, May 23, 2014
282. Liu, Yuzhu , Wang, Hui; Prasad, Ajay K.; Advani, Suresh G. “Role of heat pipes in improving the hydrogen charging rate in a metal hydride storage tank” International Journal of Hydrogen Energy, v 39, n 20, p 10552-10563, July 3, 2014
281. Baker, Andrew M., Wang, Liang; Johnson, William B.; Prasad, Ajay K.; Advani, Suresh G. ,” Nafion membranes reinforced with ceria-coated multiwall carbon nanotubes for improved mechanical and chemical durability in polymer electrolyte membrane fuel cells,” Journal of Physical Chemistry C, v 118, n 46, p 26796-26802, November 20, 2014
280. Wang, Liang , Advani, Suresh G.; Prasad, Ajay K. “Self-hydrating Pt/CeO2-Nafion composite membrane for improved durability and performance,” ECS Electrochemistry Letters, v 3, n 5, p F30-F32, 2014
279. Koepf, Erik E. , Advani, Suresh G.; Prasad, Ajay K., Experimental investigation of ZnO powder flow and feeding characterization for a solar thermochemical reactor,” Powder Technology, v 261, p 219-231, July 2014
278. Sietins, Jennifer M., Gillespie, John W.; Advani, Suresh G. “Transmission electron microscopy of an ultrasonically consolidated copper-aluminum interface,” Journal of Materials Research, v 29, n 17, p 1970-1977, June 17, 2014
277. Yang, Haoda Simacek, Pavel; Advani, Suresh G. “Experimental characterization of thermal dispersion in fibrous porous media,” Journal of Porous Media, v 17, n 4, p 323-336, 2014
276. Gangloff Jr, John J. , Daniel, Claire; Advani, Suresh G. “A model of two-phase resin and void flow during composites processing,” International Journal of Multiphase Flow, v 65, p 51-60, October 2014
275. Sahin, Ömer Sinan , Koellhoffer, Steve; Gillespie, John; Advani, Suresh; Bogetti, Travis “Thermal modeling during continuous ultrasonic welding,” Turkish Journal of Engineering and Environmental Sciences, v 38, n 1, p 79-96, 2014
274. Cetinbas, Firat C. , Advani, Suresh G.; Prasad, Ajay K. “Investigation of a polymer electrolyte membrane fuel cell catalyst layer with bidirectionally-graded composition,” Journal of Power Sources, v 270, p 594-602, December 15, 2014
273. Park, Jaehyung , Wang, Liang; Advani, Suresh G.; Prasad, Ajay K. “Mechanical stability of H3PO4-Doped PBI/Hydrophilic-Pretreated PTFE membranes for high temperature PEMFCs,” Electrochimica Acta, v 120, p 30-38, February 20, 2014
272. Gangloff, John J. , Hwang, Wook R.; Advani, Suresh G. “Characterization of bubble mobility in channel flow with fibrous porous media walls”, International Journal of Multiphase Flow, v 60, p 76-86, April 2014
2013 (260-271)
271. Kelly, GS , Advani, SG , Gillespie, JW , Bogetti, TA , “A model to characterize acoustic softening during ultrasonic consolidation”, Journal Of Materials Processing Technology Volume: 213, Pages: 1835-1845 2013.
270. Koepf, EE, Lindemer, MD , Advani, SG , Prasad, AK , “Experimental Investigation of Vortex Flow in a Two-Chamber Solar Thermochemical Reactor”, Journal Of Fluids Engineering-Transactions Of The ASME Volume: 135 Issue: 11 2013.
269. Wang, L , Advani, SG , Prasad, AK , “Degradation reduction of polymer electrolyte membranes using CeO2 as a free-radical scavenger in catalyst layer”, Electrochimica Acta Volume: 109 Pages: 775-780, 30 2013.
268 Cender, TA, Simacek, P , Advani, SG, “Resin film impregnation in fabric prepregs with dual length scale permeability”, Composites Part A-Applied Science And Manufacturing Volume: 53 Pages: 118-128, 2013.
267.Mueller, JE , Gillespie, JW , Advani, SG , “Effects of Interaction Volume on X-ray Line-scans across an Ultrasonically Consolidated Aluminum/Copper Interface”, Scanning Volume: 35 Issue: 5 Pages: 327-335, 2013.
266.Wang, L , Advani, SG , Prasad, AK, “PBI/Nafion/SiO2 hybrid membrane for high-temperature low-humidity fuel cell applications”, Electrochimica Acta Volume: 105 Pages: 530-534, 2013.
265. Hosseinzadeh, E , Rokni, M ; Advani, SG ,Prasad, “Performance simulation and analysis of a fuel cell/battery hybrid forklift truck”, International Journal Of Hydrogen Energy Volume: 38 Issue: 11 Pages: 4241-4249, 2013.
264. Yu, H , Nonn, A ,; Schneiders, S, Heider, D , Advani, SG , “An Approach to Enhance Through-Thickness Thermal Conductivity of Polymeric Fiber Composites”, International Journal Of Heat And Mass Transfer Volume: 59 Pages: 20-28, 2013.
263. Simacek, P , Advani, SG , Gruber, M , Jensen, B, “A non-local void filling model to describe its dynamics during processing thermoplastic composites”, Composites Part A-Applied Science And Manufacturing Volume: 46 Pages: 154-165, 2013.
262.Wang, L , Advani, SG, Prasad, AK, “Membrane Electrode Assembly with Enhanced Membrane/Electrode Interface for Proton Exchange Membrane Fuel Cells”, Journal Of Physical Chemistry C Volume: 117 Issue: 2 Pages: 945-948, 2013.
261. Cetinbas, FC , Advani, SG, Prasad, AK , “A Modified Agglomerate Model with Discrete Catalyst Particles for the PEM Fuel Cell Catalyst Layer”, Journal Of The Electrochemical Society Volume: 160 Issue: 8 Pages: F750-F756, 2013.
260. Bhargava S, Lewis R, Kubota M, Li X, Advani SG, Deitzel J, and Prasad AK, “High reflectivity coatings with superior adhesion properties”, International Journal of Adhesion and Adhesives, 40:120-128, 2013.
2012 (244-259)
259. Park J, Wang L, Advani SG, and Prasad AK, “Durability analysis of Nafion/PTFE membranes for PEMFCs”,Journal of the Electrochemical Society, 159(12):F864- F870, 2012.
258. Koepf E, Advani SG, and Prasad AK, “A novel beam-down, gravity-fed, solar thermochemical receiver/reactor for direct solid particle decomposition: design, modeling, and experimentation”, International Journal of Hydrogen Energy, 37:16871-16887, 2012.
257. Wang H, Prasad AK, and Advani SG, “Hydrogen storage system based on hydride materials incorporating a helical-coil heat exchanger”, International Journal of Hydrogen Energy, 37:14292-14299, 2012.
256. Wang L, Prasad AK, and Advani SG, “Novel composite membrane based on SiO2-MWCNTs and Nafion for PEMFCs”, Journal of the Electrochemical Society, 159(8):F490-F493, 2012.
255. Baker AM, Wang L, Advani SG, and Prasad AK, “Nafion membranes reinforced with magnetically-controlled Fe3O4/MWCNTs for PEMFCs”, Journal of Materials Chemistry, 22:14008-14012, 2012.
254. Giuliano MR, Prasad AK, and Advani SG, “Experimental study of an air-cooled thermal management system for high capacity lithium-titanate batteries”, Journal of Power Sources, 216:345-352, 2012.
253. Palanichamy K, Advani SG, and Prasad AK, “Magneli phase TinO2n-1 as corrosion resistant PEM fuel cell catalyst support”, Journal of Solid State Electrochemistry, 16(7):2515-2521, 2012.
252. Wang L, Advani SG, and Prasad AK, “Novel ionic liquid-based composite membrane for PEMFCs operating under low relative humidity conditions”, Electrochemical and Solid-State Letters, 15(4):B44-B47, 2012.
251. Brunner DA, Marcks S, Bajpai M, Prasad AK, Advani SG, “Design and characterization of an electronically controlled variable flow rate ejector for fuel cell applications”, International Journal of Hydrogen Energy, 37(5):4457-4466, 2012.
250. Wang H, Prasad AK, and Advani SG, “Hydrogen storage systems based on hydride materials with enhanced thermal conductivity”, International Journal of Hydrogen Energy, 37:290-298, 2012.
249. Palanichamy K, Advani SG, and Prasad AK, “A functional monomer to synthesize sulfonated poly (ether ether ketone)with sulfonic acid group in the pendant side chain”, Journal of Applied Polymer Science, 123(6):3331-3336, 2012.
248. Bubna P, Advani SG, and Prasad AK, “Integration of batteries with ultracapacitors for a fuel cell hybrid transit bus”, Journal of Power Sources, 199:360-366, 2012.
247. Gascons,Marc; Blanco,Norbert; Simacek,Pavel; Peiro,Joaquim; Advani,Suresh; Matthys,Koen, “Impact of the Fibre Bed on Resin Viscosity in Liquid Composite Moulding Simulations”, Applied Composite Materials, 2012, 19, 3-4, 669-688.
246. Simacek,Pavel; Eksik,Omer; Heider,Dirk; Gillespie,John W., Jr.; Advani,Suresh, “Experimental validation of post-filling flow in vacuum assisted resin transfer molding processes”, Composites Part A-Applied Science and Manufacturing, 2012, 43, 3, 370-380.
245. Walther,Joseph; Simacek,Pavel; Advani,Suresh G., “The effect of fabric and fiber tow shear on dual scale flow and fiber bundle saturation during liquid molding of textile composites”, International Journal of Material Forming, 2012, 5, 1, 83-97
244. Wang,J.; Andres,E.; Simacek,P.; Advani,S.G., “Use of Flow Simulation to Develop Robust Injection and Vent Schemes that Account for Process and Material Variability in Liquid Composite Molding Process”, Computer Modeling in Engineering & Sciences, 2012, 88, 3, 155-181
2011 (231-243)
243. Catlin Glenn; Advani Suresh G.; Prasad Ajay K,” Optimization of polymer electrolyte membrane fuel cell flow channels using a genetic algorithm,” Journal Of Power Sources Volume: 196 Issue: 22 Pages: 9407-9418 (2011)
242. Koellhoffer Steve; Gillespie John W. Jr.; Advani Suresh G.; et al., “Role of friction on the thermal development in ultrasonically consolidated aluminum foils and composites,” Journal Of Materials Processing Technology Volume: 211 Issue: 11 Pages: 1864-1877 ( 2011)
241. Okonkwo K.; Simacek P.; Advani S. G.; et al., “Characterization of 3D fiber preform permeability tensor in radial flow using an inverse algorithm based on sensors and simulation”, Composites Part A-Applied Science And Manufacturing Volume: 42 Issue: 10 Pages: 1283-1292 ( 2011)
240.. Hwang Wook Ryol; Advani Suresh G.; Walsh Shawn , “Direct simulations of particle deposition and filtration in dual-scale porous media”, Composites Part A-Applied Science And Manufacturing Volume: 42 Issue: 10 Pages: 1344-1352 (2011).
239. Krishnan Palanichamy; Advani Suresh G.; Prasad Ajay K, “Synthesis and evaluation of polythiocyanogen (SCN)(x) as a rechargeable lithium-ion battery electrode material” Journal Of Power Sources Volume: 196 Issue: 18 Pages: 7755-7759 (2011).
238. Chandrasekaran V. C. S.; Advani S. G.; Santare M. H., “Influence of resin properties on interlaminar shear strength of glass/epoxy/MWNT hybrid composites” Composites Part A-Applied Science And Manufacturing Volume: 42 Issue: 8 Pages: 1007-1016 (2011)
237. Giuliano Michael R.; Advani Suresh G.; Prasad Ajay K., “Thermal analysis and management of lithium-titanate batteries”, Journal Of Power Sources Volume: 196 Issue: 15 Pages: 6517-6524 ( 2011)
236. Steggall-Murphy Claire; Simacek Pavel; Advani Suresh G.; et al. “A Model For Particle Deposition During Impregnation Of Fibrous Porous Media”, Journal Of Porous Media Volume: 14 Issue: 5 Pages: 383-394 ( 2011)
235. Justin B. Alms, James L. Glancey and Suresh G. Advani, “Liquid Control Molding Technologies using Vacuum Induced Preform Relaxation,” Composites Part A: Applied Science and Manufacturing, Volume 42, , Pages 57-65 (2011). Justin B. Alms, James L. Glancey and Suresh G. Advani, “Liquid Control Molding Technologies using Vacuum Induced Preform Relaxation,” Composites Part A: Applied Science and Manufacturing, Volume 42, Issue 1, January 2011, Pages 57-65.
234.. Bubna Piyush; Advani Suresh G.; Prasad Ajay K., “Integration of batteries with ultracapacitors for a fuel cell hybrid transit bus”, Journal Of Power Sources Volume: 199 Pages: 360-366 DOI: 10.1016/j.jpowsour.2011.09.097
233. . Wang Liang; Prasad Ajay K.; Advani Suresh G., “Freeze/Thaw Durability Study of MWCNT-Reinforced Nafion Membranes”, Journal Of The Electrochemical Society Volume: 158 Issue: 12 Pages: B1499-B1503 (2011).
232.. Brunner DA, Marcks S, Bajpai M, Prasad AK, Advani SG, “Design and characterization of an electronically controlled variable flow rate ejector for fuel cell applications,” International Journal of Hydrogen Energy, published online.
231. . K. Palanichamy, S.G. Advani, and A.K. Prasad, “A functional monomer to synthesize sulfonated poly (ether ether ketone) with sulfonic acid group in the pendant side chain,” Journal of Applied Polymer Science, 123(6):3331-3336, 2012.
2010 (217-230)
230. Wook Ryol Hwang and Advani, S.G ,”Numerical simulations of Stokes-Brinkman equations for permeability prediction of dual scale fibrous porous media”, Physics of Fluids, v 22, n 11, p 113101 (14 pp.), (2010)
229. Alms, Justin, Garnier, Laurent; Glancey, James L.; Advani, Suresh G. “In-plane permeability characterization of the vacuum infusion processes with fiber relaxation,” International Journal of Material Forming, v 3, n SUPPL. 2, p 1267-1275, 2010.
228. Brunner D., Prasad A.K., Advani S.G., and Peticolas B.W., “A robust cell voltage monitoring system for analysis and diagnosis of fuel cell or battery systems,” Journal of Power Sources, Vol. 195, pp. 8006-8012, (2010).
227. Simacek P, Neacsu V, Advani SG , “A Phenomenological Model for Fiber Tow Saturation of Dual Scale Fabrics in Liquid Composite Molding”, POLYMER COMPOSITES Volume: 31 Issue: 11 Pages: 1881-1889 ( 2010).
226. Srikanth Arisetty, Ulrike Krewer, Suresh G. Advani, and Ajay K. Prasad, “Coupling of Kinetic and Mass Transfer Processes in Direct Methanol Fuel Cells,” Journal of The Electrochemical Society, 157 (10), B1443-B1455 (2010)
225. V.C.S. Chandrasekaran, S.G. Advani, M.H. Santare,” Role of processing on interlaminar shear strength enhancement of epoxy/glass fiber/multi-walled carbon nanotube hybrid composites,” Carbon pp. 3692-3699 (2010).
224. B. Markicevic, A. Nalla,H.K. Navaz, D. Heider,S. Walsh, and S.G. Advani, “Closed Form Solution of Resin Flow From Multiple Line Gates in Liquid Composite Molding,”Polymer Composites Volume 31, Issue 8, pages 1434–1441, August 2010.
223. Justin B. Alms, James L. Glancey and Suresh G. Advani,” Mechanical properties of composite structures fabricated with the vacuum induced preform relaxation process,” Composite Structures92 (2010) 2811–2816
222. Piyush Bubna, Doug Brunner, Suresh G. Advani, and Ajay K. Prasad,” Prediction-based optimal power management in a fuel cell/battery plug-in hybrid vehicle,” Journal of Power Sources 195 (2010) 6699–6708
221. Justin Merotte, Pavel Simacek and Suresh G. Advani, “Resin flow analysis with fiber preform deformation in through thickness direction during Compression Resin Transfer Molding,”Composites Part A: Applied Science and Manufacturing, Volume 41, Issue 7, July 2010, Pages 881-887
220. Justin Merotte, Pavel Simacek and Suresh G. Advani,” Flow analysis during compression of partially impregnated fiber preform under controlled force,” Composites Science and Technology70 (2010) 725–733.
219. Dusan Spernjak, Ajay K. Prasad and Suresh G. Advani, “In situ comparison of water content and dynamics in parallel, single-serpentine, and interdigitated flow fields of polymer electrolyte membrane fuel cells,” Journal of Power Sources 195 (2010) 3553–3568.
218. Piyush Bubna, Doug Brunner, John J. Gangloff Jr., Suresh G. Advani, and Ajay K. Prasad “Analysis, operation and maintenance of a fuel cell/battery series-hybrid bus for urban transit applications,” Journal of Power Sources 195 (2010) 3939–3949
217. Claire Steggall-Murphy, Pavel Simacek, Suresh G. Advani, Shridhar Yarlagadda, and Shawn Walsh, “A model for thermoplastic melt impregnation of fiber bundles during consolidation of powder-impregnated continuous fiber composites,” Composites Part A: Applied Science and Manufacturing, Volume 41, Issue 1, January 2010, Pages 93-100
2009 (204-216)
216. Krishnan P, Advani SG, Prasad AK, “Cobalt oxides as Co2B catalyst precursors for the hydrolysis of sodium borohydride solutions to generate hydrogen for PEM fuel cells”, International J. of Hydrogen Energy, Volume: 33 Issue: 23 Pages: 7095-7102 (2009).
215. Zhang FY, Advani SG , Prasad AK, Boggs ME , Sullivan SP ,Beebe TP ,”Quantitative characterization of catalyst layer degradation in PEM fuel cells by X-ray photoelectron spectroscopy”, Electrochimica Acta, Volume: 54 Issue: 16 Pages: 4025-4030 (2009)
214. Weigert EC, Arisetty S, Advani SG, Prasad AK and Chen JG,”Electrochemical Evaluation of Tungsten Monocarbide (WC) and Platinum-modified WC as Alternative DMFC Electrocatalysts,”Journal of New Materials for Electrochemical Systems, Volume: 11 Issue: 4 Pages: 243-251 (2009).
213. Simacek P, Heider D, Gillespie JW, and Advani SG, “Post-filling flow in vacuum assisted resin transfer molding processes: Theoretical analysis,” Composites Part A-Applied Science And Manufacturing,Volume: 40 Issue: 6-7 Pages: 913-924 (2009).
212. Alms JB, Yonko PJ, McDowell RC, and Advani SG, “Design and Development of an I-Beam from Natural Composites,” Journal of Biobased Materials and Bioenergy, Volume: 3 Issue: 2 Pages: 181-187 (2009).
211. Lawrence JM, Neacsu V, Advani SG, “Modeling the impact of capillary pressure and air entrapment on fiber tow saturation during resin infusion in LCM”, Composites Part A-Applied Science And Manufacturing Volume: 40 Issue: 8, Pages: 1053-1064 (2009).
210. Johnson BB, Santare MH, Novotny JE, Advani, SG, “Wear behavior of Carbon Nanotube/High Density Polyethylene composites,” Mechanics of Materials, Volume: 41 Issue: 10, Pages: 1108-1115 (2009).
209. Bhat, P , Merotte, J , Simacek, P , Advani, SG, “Process analysis of compression resin transfer molding,” Composites Part A-Applied Science And Manufacturing, 40 (4): 431-441 (2009).
208. Zhou, F , Advani, SG , Wetzel, ED, “Simulation of the Slow Drag of a Cylinder through a Confined Pressurized Bed of Dumbbell and Elliptically Cylindrical Granules Using the Discrete Element Method,” CMES-Computer Modeling In Engineering & Sciences, 39 (1): 49-66 J(2009).
207. Krishnan, P , Advani, SG , Prasad, AK, “Thin-film CoB catalyst templates for the hydrolysis of NaBH4 solution for hydrogen generation”, Applied Catalysis B-Environmental, 86 (3-4): 137-144 ( 2009).
206. .Arisetty, S , Jacob, CA , Prasad, AK, Advani, SG, “Regulating methanol feed concentration in direct methanol fuel cells using feedback from voltage measurements,” Journal Of Power Sources, 187 (2): 415-421 ( 2009).
205. Alms, JB, Catry, A, Glancey, JL, Advani, SG, “Flow Modification Process for Vacuum Infusion Using Port-Based Resin Flow Control,” Sampe Journal, 45 (2): 54-63 (2009)
204. Spernjak, D., Advani, S. G., & Prasad, A. K. (2009). “Simultaneous neutron and optical imaging in PEM fuel cells” Journal of the Electrochemical Society, 156(1), B109-B117.
2008(191-203)
203. Arisetty, S., Advani, S. G., & Prasad, A. K. (2008). “Methanol diffusion rates through the anode diffusion layer in direct methanol fuel cells from limiting current measurements”. Heat and Mass Transfer, 44(10), 1199-1206.
202. Brown, D., Alexander, M., Brunner, D., Advani, S. G., & Prasad, A. K. (2008). “Drive-train simulator for a fuel cell hybrid vehicle”. Journal of Power Sources, 183(1), 275-281.
201. Fan, Z., & Advani, S. G. (2008). “Capillary effect of multi-walled carbon nanotubes suspension in composite processing”. Journal of Nanoscience and Nanotechnology, 8(4), 1669-1678.
200. Fan, Z., Santare, M. H., & Advani, S. G. (2008). “Interlaminar shear strength of glass fiber reinforced epoxy composites enhanced with multi-walled carbon nanotubes”, Composites Part A-Applied Science and Manufacturing, 39(3), 540-554.
199. Krishnan, P., Advani, S. G., & Prasad, A. K. (2008). “Cobalt oxides as Co2B catalyst precursors for the hydrolysis of sodium borohydride solutions to generate hydrogen for PEM fuel cells”.International Journal of Hydrogen Energy, 33(23), 7095-7102.
198. Krishnan, P., Yang, T., Advani, S. G., & Prasad, A. K. (2008). “Rotating ring-disc electrode (RRDE) investigation of borohydride electro-oxidation”. Journal of Power Sources, 182(1), 106-111.
197. Sharp, K., Bogdanovich, A. E., Tang, W., Heider, D., Advani, S.G. , & Glowiana, M. (2008). “High through-thickness thermal conductivity composites based on three-dimensional woven fiber architectures”. AIAA Journal, 46(11), 2944-2954.
196. Simacek, P., Advani, S. G., & Iobst, S. A. (2008). “Modeling flow in compression resin transfer molding for manufacturing of complex lightweight high-performance automotive parts”. Journal of Composite Materials, 42(23), 2523-2545.
195. Simacek, P., Advani, S. G., Zonvide, K., & Barrett, L. W. (2008). “Modeling of resin flow in reinforced dielectric prepregs”. Journal of Electronic Packaging, 130(2), 021001
194. Erich C. Weigert, Srikanth Arisetty, Suresh G. Advani, Ajay K. Prasad and Jingguang G. Chen, “Electrochemical Evaluation of Tungsten Monocarbide (WC) and Platinum-modified WC as Alternative DMFC Electrocatalysts,” Journal of New Materials for Electrochemical Systems 11, 243-251 (2008).
193. Tang, W., & Advani, S. G. (2008). “Dynamic simulation of carbon nanotubes in simple shear flow”. Computer Modeling in Engineering & Sciences, 25(3), 149-164.
192. Zhang, F., Advani, S. G., & Prasad, A. K. (2008). “Performance of a metallic gas diffusion layer for PEM fuel cells”. Journal of Power Sources, 176(1), 293-298.
191. Zhou, F., Alms, J., & Advani, S. G. (2008). “A closed form solution for flow in dual scale fibrous porous media under constant injection pressure conditions”. Composites Science and Technology, 68(3-4), 699-708.
2007 (171-190)
190. Chohra, M., Advani, S. G., & Yarlagadda, S. (2007). “Filtration of particles through a single layer of dual scale fibrous porous media”. Advanced Composites Letters, 16(6), 205-221
189. Tang WZ and Suresh G. Advani, “Nonequilibrium molecular dynamics simulation to describe the rotation of rigid, low aspect ratio carbon nanotubes in simple shear flow,” JOURNAL OF CHEMICAL PHYSICS 126 (14): Art. No. 144711 APR 14 2007
188. Corlay C and Suresh G. Advani, “Temperature distribution in a thin composite plate exposed to a concentrated heat source,” INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER 50 (15-16): 2883-2894 JUL 2007
187. Fan ZH,and Suresh G. Advani, “Rheology of multiwall carbon nanotube suspensions”, JOURNAL OF RHEOLOGY 51 (4): 585-604 JUL-AUG 2007
186. Lawrence JM, Frey P, Abu Obaid A, Yarlagadda, S. and Suresh G. Advani, “Simulation and validation of resin flow during manufacturing of composite panels containing embedded impermeable inserts with the VARTM process”, POLYMER COMPOSITES 28 (4): 442-450 AUG (2007).
185. Feser JP, Prasad AK and Suresh G. Advani, “Particle image velocimetry measurements in a model proton exchange membrane fuel cell,” JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY 4 (3): 328-335 AUG (2007).
184. Tang W, and Suresh G. Advani, “Non-equilibrium molecular dynamics simulation of water flow around a carbon nanotube,” CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES 22 (1): 31-40 DEC (2007).
183. Alms J, and Suresh G. Advani, “Simulation and experimental validation of flow flooding chamber method of resin delivery in liquid composite molding” , COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING 38 (10): 2131-2141 (2007).
182. Kuentzer N, Simacek P, Suresh G. Advani , and Shawn Walsh, ” Correlation of void distribution to VARTM manufacturing techniques,” COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING 38 (3): 802-813 2007
181. Alms J, Zhou FP, Corlay C, and Suresh G. Advani “Thermal detection of air leakage in vacuum infusion processes,” SAMPE JOURNAL 43 (1): 56-59 JAN-FEB 2007
180. Arisetty S, Prasad AK,and Suresh G. Advani, “Metal foams as flow field and gas diffusion layer in direct methanol fuel cells”, JOURNAL OF POWER SOURCES 165 (1): 49-57 FEB 25 2007
179. Zhang FY, Spernjak D, Prasad AK, and and Suresh G. Advani, “In situ characterization of the catalyst layer in a polymer electrolyte membrane fuel cell”, JOURNAL OF THE ELECTROCHEMICAL SOCIETY 154 (11): B1152-B1157 2007
178. Dusan Spernjak, Ajay K. Prasad, and Suresh G. Advani,”Experimental investigation of liquid water formation and transport in a transparent single-serpentine PEM fuel cell”, Journal of Power Sources 170 334–344 (2007).
177. Wenzhong Tang and Suresh G. Advani , “Nonequilibrium molecular dynamics simulation to describe the rotation of rigid, low aspect ratio carbon nanotubes in simple shear flow,” J. Chem. Phys.126, 144711-16 (2007).
176. Simacek P and Suresh G. Advani, “Modeling resin flow and fiber tow saturation induced by distribution media collapse in VARTM,” COMPOSITES SCIENCE AND TECHNOLOGY 67 (13): 2757-2769 OCT (2007).
175.Obaid, A. Abu, Gokce, A.,; Yarlagadda, S., S. G. Advani, ” Enhancement of adhesion between copper and vinyl ester in glass fiber-vinyl ester composites,”Composite Interfaces, Volume 14, pp. 99-116 (2007)
174. V. Neacsu, J. Leisen, H. W. Beckham and S. G. Advani, “Use of magnetic resonance imaging to visualize impregnation across aligned cylinders due to capillary forces,” Experiments in Fuilds, 42 (3): 425-440 MAR 2007
173.Fuping Zhou, Suresh Advani, and Eric Wetzel, “”Simulation of Slowly Dragging a Cylinder through Confined Pressurized Bed of Granular Materials using the Discrete Element Method”, Physics of Fluids 19 (1): Art. No. 013301 JAN 2007.
172. Dirk Heider, Pavel Simacek, Aurimas Dominauskas, Hope Deffor, Suresh Advani and John W. Gillespie, Jr, “Infusion design methodology for thick-section, low-permeability preforms using inter-laminar flow media”, Composites Part A: Applied Science and Manufacturing, Volume 38, Issue 2, February 2007, Pages 525-534.
171. Chang-Eui Hong, Joong-Hee Lee, Prashantha Kalappa and Suresh G. Advani, “Effects of oxidative conditions on properties of multi-walled carbon nanotubes in polymer nanocomposites”, Composites Science and TechnologyVolume 67, pp 1027-1034 (2007)
2006 (157-170)
170. Zhang FY, Prasad AK, Advani SG, “Investigation of a copper etching technique to fabricate metallic gas diffusion media”, Journal Of Micromechanics And Microengineering 16 (11): N23-N27 NOV 2006
169. Suresh G. Advani, “Special issue – Selected contributions from the 7th International Conference on Flow Processes in Composite Materials held at University of Delaware, USA” – Preface,Composites Part A: Applied Science and Manufacturing, 37 (6): pp. 819-819( 2006)
168. Wenzhong Tang and Suresh G. Advani, “Drag on a Carbon Nanotube in uniform liquid Argon flow,” J of Chemical Physics,125, 174706 (2006).
167. J.P. Feser, A.K. Prasad and S.G. Advani, “Experimental characterization of in-plane permeability of gas diffusion layers”, J.of Power Sources, 162, 1226-1231( 2006)
166. J.P. Feser, A.K. Prasad and S.G. Advani, ” On the relative influence of convection in serpentine flow fields of PEM fuel cells,” J. of Power Sources Volume 161, Issue 1 , 20 October 2006, Pages 404-412
165. Fuping Zhou, Nina Kuentzer, Pavel Simacek, Suresh G. Advani and Shawn Walsh, “Analytic characterization of the permeability of dual-scale fibrous porous media,” Composites Science and Technology, Volume 66, Issue 15, 1 December 2006, Pages 2795-2803
164.Nina Kuentzer, Pavel Simacek, Suresh G. Advani, and Shawn Walsh, “Permeability characterization of dual scale fibrous porous media,”Composites Part A: Applied Science and Manufacturing, 37 (2006) pages 2057–2068,
163.Chohra Mourad, Shridhar Yarlagadda, Gokce Ali and Suresh G. Advani, “Modeling of Filtration through Multiple Layers of Dual Scale Fibrous Porous Media”, Polymer Composites, Volume 27, Issue 5, 2006 October, Pages 570-581
162.Simacek, Pavel and Suresh G. Advani, “Role of Acceleration Forces in Numerical Simulation of Mold Filling Processes in Fibrous Porous Media,” Composites Part A: Applied Science and Manufacturing,37 (2006) pages 1970–1982
161. Li-Yu Lin, Joong-Hee Lee, Chang-Eui Hong, Gye-Hyoung Yoo, and Suresh G. Advani, “Preparation and Characterization of Layered Silicate-Glass Fiber-Epoxy Hybrid Nanocomposites via Vacuum-Assisted Resin Transfer Molding (VARTM),” Composites Science and Technology, Volume 66, Issue 13, October 2006, Pages 2116-2125
160.Jeffrey M. Lawrence, Patrice Hughes, and Suresh G. Advani, “Experimental Validation of Dependence Map Based Control in Liquid Composite Molding”, Journal of Composite Materials, Volume 40, pp. 1137-62 (2006).
159. Neacsu V.; Obaid A.A.and Suresh G. Advani, “Spontaneous radial capillary impregnation across a bank of aligned micro-cylinders. Part II: Experimental investigations,” International Journal of Multiphase Flow Volume 32, Issue 6 , 2006, Pages 677-691
158. Neacsu V.; Obaid A.A.and Suresh G. Advani , “Spontaneous radial capillary impregnation across a bank of aligned micro-cylinders. Part I: Theory and model development ,” International Journal of Multiphase Flow Volume 32, Issue 6 , 2006, Pages 661-676.
157. Zhou FP, Suresh G. Advani, Wetzel ED, “Characterization of Viscous behavior of Compacted Ceramic Particles under Shear and Pressure Loads,” International Journal of Applied Mechanics and Engineering, pp. 505-515 (2006).
2005 (144-156)
156. Simacek, Pavel and Advani, Suresh G,”Simulating Three Dimenional Flow in Compression Resin Transfer Molding,”, Revue Européenne des Éléments Finis, Vol. 14, pp 777-802 (2005).
155. Markicevic B, Litchfield D, Heider D, et al. Role of flow enhancement network during filling of fibrous porous media, Journal of Porous Media, 8 (3):pp. 281-297 (2005 )
154. Zhou FP, Advani SG, Wetzel ED ,”Slow drag in polydisperse granular mixtures under high pressure ,” Physical review E 71 (6): Art. No. 061304 Part 1 JUN 2005
153.Jeffrey M. Lawrence and Suresh G. Advani, “Dependence Map Based Flow Control to Reduce Void Content in Liquid Composite Molding”, Materials and Manufacturing Processes, 20 (6): 933-960 (2005).
152. Ali Gokce, Mourad Chohra , Suresh G. Advani and Shawn M. Walsh, ” Permeability estimation algorithm to simultaneously characterize distribution media and fabric permeability values in vacuum assisted resin transfer molding process,”Composites Science and Technology Vol 65/14 pp 2129-2139 (2005).
151. Wenzhong Tang and Suresh G. Advani, “Dynamic Simulation of Long Flexible Fibers in Shear Flow,”CMES: Computer Modeling in Engineering & Sciences, Volume 8, Pages 165-176 (2005).
150. N.C. Correia, F. Robitaille, A.C. Long, C.D. Rudd, P. Šimacek and S.G. Advani, “Analysis of the vacuum infusion moulding process: I. Analytical formulation,” Composites Part A: Applied Science and Manufacturing, Volume 36 (12): 1645-1656 (2005)
149. Joong-Hee Lee, Daeseung Jung, Chang-Eui Hong, Kyong Y. Rhee and Suresh G. Advani,”Properties of polyethylene-layered silicate nanocomposites prepared by melt intercalation with a PP-g-MA compatibilizer,”Composites Science and Technology , Volume 65, Issue 13, Pages 1996-2002
148. Zhihang Fan , and Suresh G. Advani,”Characterization of Orientation State of Carbon Nanotubes in Shear Flows,”
Polymer Volume 46, Issue 14, Pages 5232-5240 (2005).
147..Jeffrey M. Lawrence, Peter Fried and Suresh G. Advani, “Automated manufacturing environment to address bulk permeability variations and race tracking in resin transfer molding by redirecting flow with auxiliary gates,”Composites Part A: Applied Science and Manufacturing, Volume 36, Issue 8, Pages 1128-1141(2005)
146. B. Markicevic, D. Heider, S.G. Advani and Shawn Walsh,”Stochastic modeling of preform heterogeneity to address dry spots formation in the VARTM Process,”Composites Part A: Applied Science and Manufacturing, Volume 36, Issue 6, Pages 851-858 (2005).
145. Devillard, Mathieu; Laut, Antoine; Advani, Suresh G., “On-line mixing during injection and simultaneous curing in liquid composite molding processes,” Polymer Composites, Volume 26, Issue 1, Pages 74-83 (2005).
144. Mathieu Devillard, Kuang-Ting Hsiao and Suresh G. Advani, “Flow sensing and control strategies to address race-tracking disturbances in resin transfer molding —part II: automation and validation ,”Composites Part A: Applied Science and Manufacturing, Volume 36, Pages 1581-1589 (2005).
2004 (128-143)
143. Zhou FP, Advani SG, Wetzel ED “Slow drag in granular materials under high pressure” PHYSICAL REVIEW E 69 (6): Art. No. 061306 Part 1 JUN 2004
142. Correia, N.C.; Robltaille, F.; Long, A.C.; Rudd, C.D.; Simacek, P.; Advani, S.G, “Use of resin transfer molding simulation to predict flow, saturation, and compaction in the VARTM process, “Journal of Fluids Engineering, Transactions of the ASME, Volume 126, Issue 2, 2004 March, Pages 210-215
141. Kuang-Ting Hsiao, Mathieu Devillard and Suresh G Advani, “Simulation based flow distribution network optimization for vacuum assisted resin transfer moulding process,” Modelling and Simulation in Materials, Science and Engineering, 12 S175-S190., (May 2004)
140. Simacek, Pavel; Advani, Suresh G.,”Gate elements at injection locations in numerical simulations of flow through porous media: Applications to mold filling” International Journal for Numerical Methods in Engineering, Volume 61, Issue 9, November, Pages 1501-1519 (2004)
139. Jeffrey M. Lawrence, Mathieu Devillard, and Suresh G. Advani, “Design and Testing of a New Injection Approach for Liquid Composite Molding” Journal of Reinforced Plastics and Composites, Volume 23, Issue 15, pages 1625-1638 (2004)
138. Jeffrey M. Lawrence, John Barr, Rajat Karmakar, Suresh G. Advani, “Characterization of preform permeability in the presence of race tracking,” Composites Part A: Applied Science and Manufacturing 35, pp. 1393–1405 (2004)
137. Ali Gokce and Suresh G. Advani, “Vent Location Optimization Using Map-Based Exhaustive Search in Liquid Composite Molding Processes,” Materials and Manufacturing Processes, 19(3), pp. 523-548, (2004).
136. Zuzana Dimitrovová and Suresh G. Advani,”Free boundary viscous flows at micro and mesolevel during
liquid composites moulding process” Int. J. Numer. Meth. Fluids 46:, pp.435-455 (2004)
135. Simacek, Pavel and S. G. Advani ”Desirable Features in Mold Filling Simulations for Liquid Molding Processes”, Polymer Composites, 25,, Pages 355-367 ( 2004).
134. Zuzana Dimitrovová and Suresh G. Advani,”Mesolevel analysis of the transition region formation and evolution during the liquid composite molding process,” Computers & Structures, 82, pp.1333-1347 (2004)
133.Ali Gokce and Suresh G. Advani, “Simultaneous gate and vent location optimization in liquid composite molding processes” Composites Part A: Applied Science and Manufacturing 35, 1419–1432 ( 2004)
132.Kuang-Ting Hsiao and Suresh G Advani, “Flow sensing and control strategies to address race-tracking disturbances in resin transfer molding. Part I: design and algorithm development”,Composites Part A: Applied Science and Manufacturing, Volume 35, Issue10, pp. 1149-1159 ( 2004)
131. N.C. Correia, F. Robitaille, A. C. Long, C.D. Rudd, P. Simacek and Suresh G. Advani, “Use of Resin Transfer Molding Simulation to Predict Flow, Saturation and Compaction in the VARTM Process,” Journal of Fluid Engineering, Volume 126, pp. 21-215 (2004).
130. S Lopatnikov, P Simacek, J GillespieJr and S G Advani, “A closed form solution to describe infusion of resin under vacuum in deformable fibrous porous media, ” Modelling and Simulation in Materials, Science and Engineering, 12 S191-S204, (May 2004)
129. Zhihang Fan , Kuang-Ting Hsiao and Suresh G. Advani, “Experimental investigation of dispersion during flow of multi-walled carbon nanotube/polymer suspension in fibrous porous media, “Carbon, Volume 42, Issue 4, pp.871-876 (2004).
128. Simacek, Pavel and S. G. Advani”The implications of fiber compaction and saturation on fully coupled VARTM simulation”, Composites Part A: Applied Science and Manufacturing, Volume 35, Issue 2, Pages 159-169 ( 2004).
2003 (113-127)
127. C. Binetruy and S.G. Advani, “Foam core deformation during liquid molding of sandwich: modelling and experimental analysis”, J Sand Struct Mater 5 (4), pp. 351–376 (2003).
126.Jeffrey M. Lawrence, Anthony Mahe, Yeshwanth Rao K. Naveen, and Suresh G. Advani, “Experimental Study to Illustrate Flow Control in Presence of Race Tracking Disturbances in Resin Transfer Molding” Advanced Composite Letters, Volume 12, Issue 3, 2003
125. B. Markicevic, D. Heider and S. G. Advani, “Filling of a System of Channels and Porous Medium: An Effectiveness Factor Based on Momentum Transfer”, Journal of Porous Media, 6, 223-233, 2003
124. R. Mathur; S. G. Advani; and B. K. Fink, “A Real-Coded Hybrid Genetic Algorithm to Determine Optimal Resin Injection Locations in the Resin Transfer Molding Process”, Computer Modeling in Engineering and Sciences, Vol. 4, No. 5, pp. 587-602 (2003).
123. Deleglise, Mylene; Simacek, Pavel; Binetruy, Christophe and Suresh Advani, “Determination of the thermal dispersion coefficient during radial filling of a porous-medium”, Journal of Heat Transfer, Volume 125, Issue 5, October, Pages 875-880 (2003).
122. Wenzhong Tang, Michael H. Santare and Suresh G. Advani, “Melt processing and mechanical property characterization of multi-walled carbon nanotube/ high density polyethylene (MWNT/HDPE) composite films,” Carbon 41 pp. 2779–2785 (2003).
121. Simacek, Pavel and S. G. Advani, “Approximate Numerical method for Prediction of Temperature Distribution in Flow through Narrow Gaps containing Porous Media,”, Computational Mechanics, Volume 32, pp, 1-9 (2003).
120. Mathieu Devillard, ; Hsiao, Kuang-Ting; Gokce, Ali; Advani, Suresh G. Advani, “On-line characterization of bulk permeability and race-tracking during the filling stage in resin transfer molding process”, Journal of Composite Materials, 37, pp. 1525-1541 (2003).
119. Ali Gokce and Suresh G.Advani, “Gate effectiveness in controlling resin advance in liquid composite molding processes,” Journal of Manufacturing Science and Engineering, Transactions of the ASME, Volume 125, Issue 3, pp. 548-555 (2003)
118. Dhiren Modi, Pavel Simacek and Suresh G. Advani, “Influence of Injection Gate Definition on the Fow-front Approximation in Numerical Simulations of Mold FillingProcesses,” International Journal for Numerical Methods in Fluids, 42, pp. 1237-1248 (2003).
117. Simacek, Pavel and S. G. Advani, “A numerical model to predict fiber tow saturation during liquid composite molding”, Composites Science and Technology, Volume 63, pp, 1725-1736 (2003 ).
116. K. Hsiao, J. Alms and S.G. Advani, “Use of epoxy/multiwalled carbon nanotubes as adhesives to join graphite fiber reinforced polymer composites,” Nanotechnology, Volume 14, pp 791-793 (2003).
115. Ali Gokce and Suresh G. Advani, “Combinatorial Search to Optimize Vent Locations in the Presence of Disturbances in Liquid Composite Molding,” Materials and Manufacturing Processes, Volume 18(2), pp261-280 (2003)
114. Jeffrey M. Lawrence and Suresh G. Advani, “Use of Sensors and Actuators to Address Flow Disturbances During Resin Transfer Molding Process,” Polymer Composites Vol. 24, pp.237-248 (2003).
113. Roopesh Mathur, S. Yaralanda and S. G. Advani, ” Genetic Algorithm Based Resistive Susceptor Design for Uniform Heating During the Induction Bonding Process,” J. of Thermoplastic Composites, 16, pp.529-550 (2003).
2002 (101-112)
112. Ali Gokce, Kuang-Ting Hsiao and Suresh G. Advani, “Branch and bound search to optimize injection gate locations in liquid composite molding processes,” Composites Part A: Applied Science and Manufacturing, Volume 33, Issue 9, Pages 1263-1272 (2002)
111. G. Estrada and S. G. Advani, “Experimental Characterization of the Influence of Tackifier Material on Preform Permeability,” J. of Composite Materials Volume 36, Issue 19, Pages 2297-2310 (2002) .
110.S. Comas-Cardona, S. Ziaee and S.G. Advani “Spatially Homogeneous Gelation in Liquid Composite Molding” Polymer Engineering and Science 42, pp. 1667-1673 (2002).
109. Pavel B. Nedanov, Suresh G. Advani, “Numerical computation of the fiber preform permeability tensor by the homogenization method”, Polymer Composites, volume 23, pp.758-770 (2002).
108. Pavel Simacek and Suresh G. Advani, “An analytic solution for the temperature distribution in flow through porous media in narrow gap. II. Radial injection,” Heat and Mass Transfer , 38, pp. 497-505 (2002).
107. Jeffrey M. Lawrence, Kuang-Ting Hsiao, Roderic C. Don, Pavel Simacek, Gonzalo Estrada, E. Murat Sozer, Hubert C. Stadtfeld and Suresh G. Advani “An approach to Couple Mold Design and On-line Control to Manufactur Complex Composite Parts by Resin Transfer Molding,” Composites part A: Applied Science and Manufacturing, Volume 33, Issue 7 pp 981-990 (2002).
106. K.-T. Hsiao and S. G. Advani, “A Method to Predict Microscopic Temperature Distribution Inside a Periodic Unit Cell of Non-isothermal Flow in Porous Media,” J. of Porous Media Volume 5, Pages 69-86 (2002).
105. H.C. Stadfeld, M. Erninger, S. Bickerton and S. G. Advani, “An Experimental method to continuously measure Permeability of Fiber Preforms as a function of Fiber Volume Fraction,” Journal of Reinfoced Plastics and Composites, Volume 21, pp. 879-900 (2002).
104.Nedanov, Pavel B.; Advani, Suresh G., “A method to determine 3D permeability of fibrous reinforcements”, Journal of Composite Materials, Volume 36, Issue 2, Pages 241-254 (2002).
103. Sylvia R. M. Kueh, Richard S. Parnas and Suresh G. Advani, “Methodology for using long-period gratings and mold-filling simulations to minimize the intrusiveness of flow sensors in liquid composite molding,” Composites Science and Technology, 62, (2), pp. 311-327 (2002).
102. Vincenza Antonucci, Michele Giordano, Kuang-Ting Hsiao and Suresh G. Advani “A methodology to reduce thermal gradients due to the exothermic reactions in composites processing”,International Journal of Heat and Mass Transfer, 45(8) pp. 1675-1684 (2002)
101. Z. Dimitrovova and Suresh G. Advani, “Analysis and Characterization of Relative Permeability and Capillary Pressure for Free Surface Flow of a Viscous Fluid across an Array of Aligned Cylindrical Fibers,” J. of Colloid and Interface Science, 245, pp. 325-337 (2002).
2001 (90-100)
100. Aluru, R., M. Keefe and S. Advani, “Simulation of Injection Molding into Rapid-Prototyped Molds,” Rapid Prototyping Journal, Vol. 17, No. 1, ( 2001).
99. Pavel Simacek and Suresh G. Advani “An Analytic Solution for the Temperature distribution in flow through porous media in narrow gapS: I – Linear Injection,”, Heat and Mass Transfer 38 (2001) 25-33
98. N. Prabhu, J. Schultz, S. Advani and K. Jacobs “Role of Coupling the Microscopic and Macroscopic Phenomena during the Crystallization of Semicrystalline Polymers” Polymer Engineering and Science 41, pp 1871-1885 (2001).
97. Joy P. Dunkers, Joseph L. Lenhart, Sylvia R. Kueh, John H. van Zanten, Suresh G. Advani and Richard S. Parnas “Fiber optic flow and cure sensing for liquid composite molding,” Optics and Lasers in Engineering 35(2), pp. 91-104 (2001).
96. A.Gokce and S. Advani, “Permeability Estimation with the Method of Cells”, J. of Composite Materials 35(8), pp.713-728 (2001).
95. K.-T. Hsiao, H. Laudorn, S. G. Advani, “Experimental Investigation of Heat Dispersion Due to Impregnation of Viscous Fluids in Heated Fibrous Porous During Composites Processing”, ASME J. of Heat Transfer, Vol. 123, pp178-187, 2001.
94. R. Mathur, D. Heider, C. Hoffmann, J. W. Gillespie Jr., S.G. Advani and B.K. Fink, “Flow Front Measurements and Model Validation in the Vacuum Assisted Resin Transfer Molding Process”Polymer Composites Vol. 22, pp.477-490 (2001).
93. K. T. Hsiao, J. W. Gillespie, Jr.,S. G. Advani and B. K. Fink, “Role of Vacuum Pressure and Port Locations on Flow Front Control for Liquid Composite Molding Processes”, Polymer Composites, Vol. 22, pp.660-668 (2001).
92. S. Roychowdhury, J.W. Gillespie, Jr. and S.G. Advani, “Volatile-Induced Void Formation in Amorphous thermoplastic Polymeric Materials: I. Modeling and Parametric Studies”, Journal of Composite Materials 35, pp 340-366 (2001)
91. Simon Bickerton, Hubert C. Stadtfeld, Karl V. Steiner and Suresh G. Advani, “Design and application of actively controlled injection schemes for resin-transfer molding,” Composites Science and Technology, 61, pp. 1625-1637 (2001).
90. J. Slade, K. Pillai, and S. G. Advani, “Investigation of unsaturated flow in woven, braided and stitched fiber mats during mold-filling in resin transfer molding”, Polymer Composites Vol. 22, pp.491-505 (2001).
2000 (75-89)
89. M. G. Joshi, M. H. Santare and S. G. Advani, “A Survey of Stress Analysis of the Hip Prosthesis”, Applied Mechanics Reviews, 53,pp. 1-18 (2000).
88. K. B. Moses, S. G. Advani and A. Reinhardt, “Investigation of Fiber Motion near Solid Boundaries in Simple Shear Flow,” Rheological Acta, 39 pp. 1655-1662 (2000).
87. Mathur,R., Advani, S.G. , Fink, B.K., “A Sensitivity-based Gate Location Algorithm for Optimal Mold Filling During the Resin Transfer Molding Process”, Advances in Computational Engineering and Sciences, Tech Science Press, Volume 1, pp 138-144 (2000).
86. M. G. Joshi, S. G. Advani, F. Miller, M. H. Santare, “Analysis of a femoral hip prosthesis designed to reduce stress shielding”, J. of Biomechanics, 33 pp. 1655-1662 (2000).
85. K. Pillai, A. Benard, K. Jacob and S. G. Advani, “Numerical Simulation of Crystallization in HDPE Extrudates,” Journal of Polymer Engineering and Science, 40 ,pp. 2356-2373 (2000).
84. Sozer, E. M., Bickerton, S., and S.G. Advani, “On-line strategic control of liquid composite mold filling process”, Composites part A: Applied Science and Manufacturing, 31, p 1383-1394 (2000)
83. Hsiao, K. T., Mathur, R., Gillespie, J. W., Fink, B. K., Advani, S. G., ” A Closed Form Solution for the vacuum Assisted Resin Transfer Molding Process”, Journal of Manufacturing Science, 122,pp. 463-472 (2000).
82. Kueh, Sylvia R.M.; Advani, Suresh G.; Parnas, Richard S.; Sensor Placement Study For Online Flow Monitoring In Liquid Composite Molding, Polymer Composites 21 pp. 436-449 (2000).
81. M. Indermaur, P. Simacek and S. G. Advani, “The Influence of Draping on the Filling of Doubly Curved Molds in the Resin Transfer Molding Process”, International Journal of Forming Processes 2, pp.321-352 (2000).
80. Laval, N., Sozer, E. M., and S.G. Advani, “Characterization of permeability around a 90o corner” Advanced Composite Letters, 9(1): pp.17-24, (2000).
79. Pavel Nedanov and S. G. Advani, “Mold Filling Simulation of Sandwich Composite Structures manufactured by Liquid Molding: A Parametric Study,” J. of Sandwich Structures and Materials, 2,pp. 117-130 (2000).
78. S. Bickerton, E. M. Sozer, P. J. Graham, and S. G. Advani, “Fabric Structure and Mold Curvature Effects on Preform Permeability and Mold Filling in the RTM Process, Part I: Experiments”, Composites – Part A: Applied Science and Manufacturing, A(31):pp. 423-438, (2000).
77. S. Bickerton, E. M. Sozer, P. Simacek, and S. G. Advani, “Fabric Structure and Mold Curvature Effects on Preform Permeability and Mold Filling in RTM Process, Part II: Predictions and Comparisons with Experiments”, Composites – Part A: Applied Science and Manufacturing, A(31): pp. 439-458, (2000).
76. J. Slade, M. Sozer, and S. Advani, “Effect of shear deformation on permeability of fiber preforms”, Journal of Reinforced Plastics and Composites 19 pp. 552-568 (2000).
75. S. Bickerton, S.G. Advani, R.V. Mohan and D.R. Shires, “Experimental Analysis and Numerical Modeling of Flow Channel Effects in Resin Transfer Molding”, Polymer Composites 21, pp.134-153(2000).
1999 (67-74)
74. S. Shuler, S. G. Advani and V. Kaliakin, “ Transient Analysis and Measurement of Anisotropic Heat Conduction in Transversely Isotropic Composite Materials” Journal of Composite Materials, 33, pp.594-613 (1999).
73. K.-T. Hsiao and S. G. Advani, “Modified Effective Thermal Conductivity Tensor due to Heat Dispersion in Fibrous Porous Media,” Int. J. of Heat Mass Transfer, Vol. 42, No. 7, pp 1237-1254, (1999).
72. Gillio, E. F., G. P. McKnight, J. W. Gillespie Jr., S. G. Advani, and K. R. Bernetich, “Processing and Properties of Co-Injected Resin Transfer Molded Vinyl-Ester and Phenolic Composites,” Polymer Composites, Vol. 20, No. 6, pp.780-788 (1999).
71. B. Ballata, S. Walsh and S. G. Advani, “Measurement of the Transverse Permeability of Fiber Preforms”, Journal of Reinforced Plastics and Composites, 18, pp.1450-1464 (1999).
70. S. Bickerton and S. G. Advani, “Characterization of Racetracking in Liquid Composite Molding Processes”, Composites Science and Technology, 59,pp. 2215-2229 (1999).
69. Mathur, R., Advani, S. G., Fink, B. K., “Use of Genetic Algorithms to Optimize Gate and Vent Locations for the Resin Transfer Molding Process”, Polymer Composites, 20, pp. 167-178 (1999).
68. Kuang-Ting Hsiao and Suresh G. Advani, “A Theory to describe heat transfer during laminar incompressible flow of a fluid in periodic porous media”, Physics of Fluids 11, pp.1738-1748 (1999).
67. Andreas Reinhardt, Suresh G. Advani Michael H. Santare, and Freeman Miller, “Preliminary Study on Composite Hip Prostheses Made by Resin Transfer Molding,” Journal of Composite Materials, 33, pp. 852-870 (1999).
1998 (62-66)
66. K. M. Pillai and S. G. Advani, A Model for Unsaturated Flow in Woven Fiber Preforms during Mold Filling in Resin Transfer Molding, J. of Composite Materials, 32, pp. 1753-1783 (1998).
65. Andre Benard and S. G. Advani, “An Analytic Model for Spherulitic Growth in Fiber-Reinforced Polymers,” Journal of Applied Polymer Science, 70, pp.1677-1687 (1998)
64. E.F. Gillio, S. G. Advani, B. K. Fink and J.W. Gillespie Jr. “Investigation of the Role of Transverse Flow in Co-injection resin Transfer Molding”. Polymer Composites 19, pp. 738-749 (1998).
63. Kuang-Ting Hsiao and Suresh G. Advani, “Modified Effective Thermal Conductivity Tensor due to Heat Dispersion in Fibrous Porous Media”, Int. J. Heat and Mass Transfer, 42 (7), pp. 1237-1254 (1998).
62. Ranganathan S. , R. G. Easterling, S. G. Advani and F. Phelan, “Evaluating the Effect of Micro-structural Variations on the Permeabilities of a porous Medium,” Polymers and Polymer Composites, 6, pp.63-73 (1998).
1997 (51-61)
61. K. M. Pillai and S. G. Advani, “ A Numerical Simulation of Unsaturated Flow in Woven Fiber Preforms during Resin Transfer Molding Process,” Polymer Composites, 19, pp.71-80 (1998).
60. Hong-Ru Lin and Suresh G. Advani, “Processing Models and Characterization of Thermoplastic Composite Wound Parts,” Polymer Composites , 18, pp.405-411 (1997).
59. T. S. Creasy and S. G. Advani “A Model Long-Discontinuous Fiber Filled Thermoplastic Melt in Extensional Flow”, J. of Non-Newtonian Fluid Mechanics, 73, p.261 (1997).
58. Simon Bickerton, Pavel Simacek, Sarah Guglielmi and Suresh G. Advani, “Investigation of Draping and its Effects on the Mold Filling Process During Manufacturing of a Compound Curved Composite Part,” Composites Part A , 28A , pp. 801-816 (1997).
57. S. Shuler and S. G. Advani , ” Flow Instabilities During the Squeeze Flow of MultiAxial Laminates,” J. of Composite Materials 31, pp.2146-2160 (1997).
56. Mogavero J. and S. G. Advani, ,” Experimental Investigation of Flow Through Multi-Layered Preforms,” Polymer Composites, 18, pp. 649-655 (1997).
55. Mogavero J., Jian Sun and S. G. Advani, ” Non-Linear Control of the Resin Transfer Molding Process,” Polymer Composites, 18, pp. 200-217 (1997).
54. Y. De Parseval, K. M. Pillai and S. G. Advani “A Simple Model for the Variation of Permeability due to Partial Saturation in Dual Scale Porous Media, “Transport in Porous Media, 27, pp.243-264 (1997).
53. S. Gupte and S. G. Advani, “Flow near the Permeable boundary of Aligned Fiber Preform,” Polymer Composites , 18, pp. 114-124 (1997).
52. S. Gupte and S. G. Advani, “Non-Darcy flow near the permeable boundary of a porous medium: An experimental investigation using LDA,” Experiments in Fluids , 22 p. 408 422 (1997).
51. S. Bickerton and S. G. Advani “Experimental Investigation and Flow Visualization of Resin Transfer Molding Process in a Non-Planar Geometry,” Composites Science and Technology, 57, pp23-33 (1997).
1996 (38-50)
50. P. Simacek and S. G. Advani, “Permeability Model for a Woven Fabric,” Polymer Composites 17, pp. 887-899 (1996).
49. K. Pillai and S. G. Advani, “Wicking Across a Fiber Bank,” J. of Colloid and Interface Science , 183, pp.100-110 (1996).
48. T. S. Creasy , S. G. Advani and R.K. Okine, “Non-linear Response of a Long Discontinuous Fiber-Melt System in Elongational Flows”, Rheological Acta 35 p. 347-355 (1996).
47. S. Shuler and S. G. Advani, “Transverse Squeeze Flow of Concentrated Aligned Fibers in Viscous Fluids”, Journal of Non-Newtonian Fluid Mechanics, 65 p. 47-74 (1996).
46. R. S. Maier, T. F. Rohaly, S. G. Advani and K. D. Fickie, “A Fast Numerical Method for Isothermal Resin Transfer Mold Filling”, International Journal of Numerical Methods in Engineering , 39 p. 1405-1422 (1996).
45. S. B. Kirschner and S. G. Advani, ” Experimental Investigation of Early Viscous Instability in a Radial Hele-Shaw Cell,” Experiments in Fluids 21 p. 187-199 (1996).
44. V. M. A. Calado and S. G. Advani, “Effective Permeability of Multi-Layer Preforms in Resin Transfer Molding,” Composites Science and Technology, 56, p. 519-531 (1996).
43. S. Ranganattan, F. Phelan and S. G. Advani, A generalized Model for the Transverse Permeability of Unidirectional Fibrous Media,” Polymer Composites 17, pp. 222-230 (1996)
42. T. S. Creasy , S. G. Advani and R.K. Okine, “Transient Rheological Behavior of a Long Discontinuous Fiber-Melt System,” J. of Rheology, 40 , pp.497-520 (1996).
41. Benard and S. G. Advani, ” A Cell Model to Describe the Spherullitic Growth in Semi-Crystalline Polymers,” Polymer Engineering and Science, 36(4) pp. 520-534 (1996).
40. Benard, S. G. Advani, and J. M. Schultz, “Solidification of Semicrystalline Polymers Using a Variable Interface Temperature Model,” , Journal of Polymer Science: Polymer Physics Edition, 34 , pp. 471-483 (1996).
39. Krach and S. G. Advani, ” Influence of Void shape, Void Volume and Matrix Anisotropy on effective thermal conductivity of a three phase composites,” J. of Composite Materials, 30(8) pp. 933-946 (1996).
38. Liu , S. Bickerton and S. G. Advani, ” Modeling and Simulation of RTM: Gate Control, Venting and Dry Spot Prediction” Composites Part A, 27, pp.135-141(1996).
1995 (28-37)
37. T. A. K. Sadiq, S. G. Advani and R. S. Parnas, “Experimental Investigation of transverse Flow Through Aligned Cylinders,” International Journal of Multiphase Flow, 21, pp. 755-74 (1995).
36. K. Pillai and S. G. Advani, “Numerical and Analytical Study to Estimate the Effect of Two Length Scales Upon the Permeability of a Fibrous porous medium,” Transport in Porous Media, 21(1), pp.1-17 (1995).
35. T. Luce, S. G. Advani, G. Howard and R. Parnas, “Permeability Characterization: Part 2: Flow Behavior in Multiple-Layer Preforms,”, Polymer Composites,16, pp. 447-458(1995).
34. R. Parnas, T. Luce, S. G. Advani and G. Howard “Permeability Characterization: Part 1: A Proposed Standard Reference Material, Polymer Composites ,16, pp. 430-446(1995)
33. Liu and S. G. Advani, “Operator Splitting Scheme for 3-D Temperature Solution Based on 2-D Flow Approximation, ” Computational Mechanics ,38, pp. 74-82(1995).
32. H. Hadavinia, S. G. Advani and R. T. Fenner, “The Evolution of Radial Fingering in Hele- Shaw Cell Using C1 Continuous Overhauser Boundary Element Method,” Engineering Analysis in Boundary Elements, 16, pp. 183-195 (1995).
31. S. K. Gupte, S. G. Advani and P. Huq, “Role of Micro-Convection Due to Non-Affine Motion of Particles in a Mono-disperse Suspension,” International J. of Heat and Mass Transfer, 38, pp. 2945-2958(1995)
30. Benard and S. G. Advani, “Energy Equation and Crystallization Kinetics of Semi-Crystalline Polymers: Regimes of Coupling,” International J. of Heat and Mass Transfer, 38, pp. 819-832 (1995).
29. S. Ranganathan, S. G. Advani and M. A. Lamontia, “A Non-isothermal Process Model for Consolidation and Void Reduction During In-situ Tow Placement of Thermoplastic Composites,” J. of Composite Materials ,29, pp.1040-1062 (1995).
28. Arefmanesh and S. G. Advani, “Non-isothermal Bubble Growth in Polymeric Foams ” Polymer Engineering and Science, 35, pp. 252-260 (1995).
1994 (24-27)
27. M. V. Bruschke and S. G. Advani, “A Numerical Approach to Model Non-isothermal, Viscous flow with Free Surfaces through Fibrous Media”, International Journal of Numerical Methods in Fluids, ,19, pp.575-603 (1994).
26. Y. Chan, A. N. Beris, and S. G. Advani, “Analysis of Periodic 3-D Viscous Flows Using A Quadratic Discrete Galerkin Boundary Element Method,” International Journal of Numerical Methods in Fluids,18, pp. 953-981 (1994).
25. R. S. Parnas, A. J. Salem, T. A. K. Sadiq, H. P. Wang, and S. G. Advani, “The interaction between micro- and macroscopic flow in RTM preforms,” Composite Structures, 27, pp.93-107 (1994).
24. S. K. Gupte and S. G. Advani, “Role of Process Modeling to Manufacture Orthopaedic Implants from Short Fiber Composites,” Polymer. Composites, 15, pp.7-17 (1994).
1993 (20-23)
23. S. G. Advani and R. Talreja, “A Continuum Approach to Determine Elastic Properties of Short Fiber Composites,” Mechanics of Composite Materials , 29(2) , pp. 171-183 (1993).
22. S. Ranganathan and S. G. Advani, “A Simultaneous Solution for Flow and Fiber Orientation in Axisymmetric Radial Flow,” J. of Non-Newtonian Fluid Mechanics,43,pp. 107-136 (1993).
21. M. V. Bruschke and S. G. Advani, “Flow of Generalized Newtonian Fluids Across a Periodic Array of Cylinders,” J. of Rheology, 37 , pp. 479-498 (1993).
20. M. Erhun and S. G. Advani, “Heat Transfer Effects during Solidification of Semi-Crystalline Polymers” Journal of Engineering Materials and Technology, 115, pp. 30-36 (1993)
1992 (16-19)
19. T. Astrom. R.B. Pipes and S. G. Advani, “On Flow Through Aligned Beds and its Application to Composites Processing,” J. Composite Materials, 20 pp. 1351-1373 (1992).
18. A. Arefmanesh, S. G. Advani and E. E. Michaelides, “An Accurate Solution Technique for Diffusion Induced Growth of a Gas Bubble in a Viscous Fluid” International J. of Heat and Mass Transfer, 35, pp. 1711-1722 (1992).
17. M. Erhun and S. G. Advani, “A BEM Approach to model heat flow during Crystallization ” International Journal of Numerical Methods in Engineering, 35, pp. 351-368 (1992).
16. Y. Chan, A. N. Beris, and S. G. Advani, “High Order Boundary Element Method Calculations of Hydrodynamic Interactions Between Particles at Close Proximity,” International Journal of Numerical Methods in Fluids. 14, pp. 1063-1086 (1992).
1991 (10-15)
15. S. RoyChowdhury and S. G. Advani, “An Experimental Investigation of Consolidation in Filament Winding ” Composites Manufacturing, 2, pp. 97-104 (1991).
14. S. Ranganathan and S. G. Advani, “On Modeling Fiber-Fiber Interactions of Flowing Suspensions in Homogeneous Flows,” J. of Rheology, 35, pp. 1499-1522 (1991).
13. P. Vanwest. R.B. Pipes, M. Keefe and S. G. Advani, “The Draping and Consolidation of Commingled Fabrics,” Composites Manufacturing 2, pp. 10-21 (1991).
12. Arefmanesh and S. G. Advani, “Bubble Growth Dynamics in a Maxwell Fluid” Rheological Acta, 30, pp. 274-283 (1991).
11. M. V. Bruschke and S. G. Advani, “RTM: Filling Simulation of Complex Three-Dimensional Shell-Like Structures,” SAMPE Quarterly, 23(1) pp. 2-11 (1991).
10. W. Vanwest, R. B. Pipes and S. G. Advani, “Consolidation Mechanics in Co-mingled Fabrics,” Polymer Composites 12, pp. 417-427 (1991).
1990 (4-9)
9. S. Ranganathan and S. G. Advani, “Characterization of Orientation Clustering in Short Fiber Composites,” J. of Polymer Science: Part B Polymer Physics .28, pp. 2651 -2672 (1990).
8. Arefmanesh, S. G. Advani, and E. E. Michaelides, “A Parametric Study of Bubble Growth in Low Pressure Foam Molding ” Polymer Engineering and Science, 30, pp. 1330-1338 (1990)
7. M. Bruschke and S. G. Advani, “A Finite Element/Control Volume Approach to Mold Filling in Anisotropic Porous Media,” Polymer. Composites, 11, pp. 398-405 (1990).
6. M. Erhun and S. G. Advani, “A Predictive Model of Heat Flow During Crystallization,” J. of Thermoplastic Composites., 3, pp. 90-109 (1990).
5. Advani, S. G. and C. L. Tucker III, “A Numerical Simulation to Predict Orientation of Short Fibers in Compression Mold Filling,” Polymer Composites, 11, pp. 164-173 (1990).
4. Advani, S. G. and C. L. Tucker III, “Closure Approximations for Three Dimensional Structural Tensors,” , J. of Rheology.,34 , pp. 367-386 (1990).
1989-1986 (1-3)
3. Altan, S. G. Advani, R. B. Pipes and S. Guceri, “On the Description of the Orientation State of Fiber Suspensions in Homogeneous Flows,” J. of Rheology, 33 , pp. 1129-1156 (1989).
2. Advani, S. G. and C. L. Tucker III, ” The Use of Tensors to Describe and Predict Fiber Orientation in Short Fiber Composites,” J. of Rheology.,31 , pp. 751-784 (1987).
1. Jackson, W. C., S. G. Advani and C. L. Tucker III, “Predicting the Orientation of Short Fibers in Thin Compression Moldings,” J. Composite Materials, 20, p. 539, (1986).
Conference Proceedings and Special Journal Issues Edited
10. Suresh G. Advani and John W. Gillespie, Editors, Recent Advances in Textile Composites, Proceedings of the 9th international conference on Textile CompositesDEStech Publishers, Lancaster, PA (2008)
9. S. G. Advani , Editor, “Proceedings of the 7th International Conference on Flow Processes in Composite Materials,” (2004).
8. R. Pitchumani and S.G. Advani, Guest Editors, Polymer Composites, “Symposium on Polymer and Composite Materials Processing”, April 2003.
7. S. G. Advani and Abdallatiff, Guest Editors of Journal of Non-Newtonian Fluid Mechanics (1999).
6. S. G. Advani and D. A. Siginer, “Rheology and Fluid Mechanics of Nonlinear Materials“, FED, Vol. 243, (1997) (New York).
5. D. A. Siginer and S. G. Advani, “Rheology and Fluid Mechanics of Nonlinear Materials”, AMD, Vol. 217, (1996) (New York).
4. S. G. Advani and C. Beckermann, Guest Editors, Journal of Engineering Materials and Technology, Vol. 115, ASME Publishers, New York (1993).
3. V. Kumar and S. G. Advani, Editors, Cellular Polymers, ASME MD, Vol. 38, New York (1992).
2. S. G. Advani, W. R. Blain, W. P. de Wilde, J. W. Gillespie, Jr., O. H. Griffin, Jr., Editors, Computer Aided Design in Composite Material Technology III, Elsevier Applied Science Publishers, New York (1992).
1. S. G. Advani and C. Beckermann, Editors, Heat and Mass Transfer in Solidification Processing, ASME HTD, Vol. 175, New York (1991)