Visiting Researchers

Wilmer Contreras Sepulveda, undergraduate exchange student
Summer 2019 – Remote Control Device and Electronics for Carbon Nanotube Sensor

–

Juan Carlos Canaza, undergraduate exchange student
Summer 2018 – Characterization of Electrophoretic Deposition Process using Carbon Nanotubes

–

Jose Fernando Rave Arango, undergraduate exchange student (with T. Schumacher)

Antioquia School of Engineering

Summer 2012 – Carbon Nanotube Based Sensors for Structural Health Monitoring of Civil Infrastructure

–

Can Li, undergraduate exchange student

Tsinghua University, Department of Mechanical Engineering

Summer 2012 – Damage Sensing of Composite Structures using Carbon Nanotubes

–

Dr. Andrew Rider

Air Vehicles Division, Defence Science and Technology Organization, Fisherman’s Bend, Victoria 3207, Australia

4/11-4/12 – Electrophoresis

–

Dr. Sang-Bok Lee (with T-W. Chou)

Korea Institute of Materials Science

9/09-1/10 – Damage Sensing Nanocomposites

–

Fei Ji, undergraduate exchange student

Tsinghua University

Summer 2010 – Thermal Diffusivity Measurements on Nanocomposites

–

Professor Woong-Ryeol Yu (with T-W. Chou)

Seoul National University

8/08-7/09 – Sensing of Damage in 3-D Composites and Simulation of Damage Sensing

–

Kyoung-Ju Kim, visiting graduate student (with T-W. Chou)

Seoul National University

2/09-07/09 – Sensing of Damage in 3-D Composites

–

Professor Kazyua Okubo (with T-W. Chou)

Doshisha University

6/06-9/07 – Biocomposites

–

Oyoung Choi (with T-W. Chou)

Korea Institute of Materials Science

4/09-7/09 – Nanocomposites Processing / Electrophoretic Deposition

–

Postdoctoral Researchers

Amanda (Lim) Wu (with T-W. Chou)

11/09-11/11 – Nanotube-Based Sensing of Damage in Joints, Development of Materials with Healing Capabilities

–

 Fei Deng (with T-W. Chou)

11/09-2/11 – Nanoscale Characterization / in-situ Microscopy

 

Graduate students

Colleen Murray (MS Student)

8/19-8/20 – Carbon Nanotube Based Structural Health Monitoring Application Using Electrophoretic Deposition

–

Hao Liu (Ph.D. Student)

1/13-8/18 – Nanotube-Based Structural Health Monitoring

–

Hongbo Dai (Ph.D. Student – Co-Advisor with T. Schumacher)

9/12-8/17 – Nanotube-Based Structural Health Monitoring

–

Qi An (Ph.D. Student)

9/10-9/15 –  Multi-Scale Hybrid Composites Processing and Electrophoresis

–

Cedric A. Jacob (Ph.D. Student)

9/09-4/15 – Electroactive Nanocomposites

–

Gerard Gallo (MS Student)

9/11-4/15 – Multiplexing of Electrical Measurements

–

Limin Gao (Visiting Ph.D. Student)

Beijing University of Aeronautics and Astronautics, performed all Ph.D. research at UD under our advisement – co-advise with T-W. Chou

9/07-9/10 – Carbon Nanotube-Based in situ Sensing of Damage in Fiber Composites

–

Kalon Lasater (MS Student)

9/10-6/12 – Environmental Effects on Nanocomposites

–

 Gaurav Pandey (Ph.D. Student; Primary Advisor with D. Heider Co-Advisor)

10-6/13 – Time Domain Reflectometry Evaluation of Composites

–

Zachary Melrose (MS Student)

9/11-7/13– Hierarchical Sensing Approaches using Patterned Nanotubes

–

–

Undergraduate students

Madison Weiss (MEEG 2019)
6/19-8/19 – Carbon Nanotube based Wearable Strain Sensor

–

David Wilson (BME 2015)
6/13-5/15 – Senior Thesis: Electrospun Reinforced Polymer-Polymer Composite Membranes for Applications in PEM Fuel Cells

–

Taylor Boyle (BME 2015)
6/13-5/15 – Electrophoretic Deposition of Carbon Nanotubes and Fiber/Interphase Characterization

–

Lindsay Evans (BME 2015)
1/14-1/15 – Scaling the Electrophoretic Deposition Process

–

Rossiny Beaujacor (BME 2014)

1/13-5/14 – Senior Thesis: Locally Patterned Carbon Nanotubes for in situ Sensing of Deformation and Damage in Composite Materials

–

Kan Liu (BME 2014)
9/13-5/15 – Printing of Carbon Nanostructures

–

Alan Radojcic (BME 2014)

3/12-7/13– Nanotube Sheet Hybrid Composites

–

Sarah Masters (BME 2014)

1/12-5/13 – Damage Sensing in Graphene Composites

–

Christine Gregg (BME 2013)

1/11-6/13 – Senior Thesis: Electrophoretic Deposition of Nanomaterials: Influence of Functionalization and Waveform on Film Morphology

Currently Graduate Student at UC Berkeley

–

Matt Sinnott (BME 2013)

10/10-6/13 – Senior Thesis: Damage Sensing in Composite Structures for the Development of a Health Monitoring System and Self-Healing Capabilities

Currently Engineer at Everson Tesla

–

Anthony Coppola (BME 2011)

6/10-7/11 – Senior Thesis: Self-Healing Composites using a Vascular Approach

Currently Graduate Student at University of Illinois

–

Sarah Friedrich (BME 2011)

6/09-7/11 – Senior Thesis: Processing of Nanocomposites for Sensing Applications

Currently Graduate Student at Johns Hopkins University

–

Zachary Melrose (BME 2011)

6/09-2/11 – Sensing of Damage in Adhesively Bonded Composite Joints

Received MS at the University of Delaware (Multifunctional Composites Lab)

Currently Ph.D. student at University of Southern California

–

Maxime Dempah (BME 2011)

6/07-6/11 – Nanocomposites Processing

Currently Graduate Student at University of Delaware

–

Gerard Gallo (BME 2011)

6/09-6/10 – Sensing of Damage in Carbon Fiber Composites

Currently Graduate Student at University of Delaware (Multifunctional Composites Lab)

–

Mitchell Wolters (Winona State University)

Summer 2010 – TDR-Based Composite Sensing

Currently Engineer at Milwaukee Composites

–

Nicholas Neal (Winona State University)

Summer 2009 – EAP Nanocomposites

Currently Graduate Student at University of Wisconsin – Madison

–

John Gangloff (BME 2009)

Academic Years 08-09, 07-08, 06-07 – Nanocomposites

Currently Graduate Student at University of Delaware

–

Thomas Mintel (BME 2009)

Academic Years 08-09, 07-08, 06-07 – Nanotube-Based Sensing

Currently Testing Manager, General Bearing Corporation

–

Cedric Jacob (BME 2009)

 Summer 2008 – Nanocomposite Electrical Properties

Currently Graduate Student at University of Delaware (Multifunctional Composites Lab)

–

Jesse Whitley (BME 2010)

Summer 2007– Adhesively Bonded Joints

Previously Engineer at Exxon Mobil, Currently MBA Student, Harvard University

–

Pierre Claver Yao Koffi (BME 2010)

Summer 2007, Academic Year 07-08 – Thermoplastic Nanocomposites Processing

Currently Graduate Student at MIT

–

Cameron Showell (BME 2010)

Summer 2007 – Mechanical Testing of Fabric Punch Behavior

Currently Engineer at US Army Research Lab

–

Dong Joon (“DJ”) Lee (BME 2009)

Summer 2007 – Vinyl Ester Nanocomposites

Currently Graduate Student at University of Southern California (completed MS degree at University of Michigan)

–

Vladimir Gendlin (Winona State University)

Summer 2006 – Piezoresistive Nanocomposites

Currently Engineer at US Army TARDEC Lab

–