Publications

Publications

2016


Tamrakar, S., B. Haque, J. W. Gillespie, Jr., “High Rate Test Method for FiberMatrix Interface Characterization,” Polymer Testing, Submitted January 2016.

Haque, B. Z., M. A. Molla, and J. W. Gillespie, Jr., “Modeling Transverse Impact on UHMWPE Soft Ballistic Sub-Laminate,” Journal of Thermoplastic Composite Materials, Accepted February 2016. Published 2016

Sockalingam, S. R. Bremble, J. W. Gillespie, Jr., and M. Keefe, “Transverse Compression Behavior of Kevlar KM2 Single Fiber,” Composites Part A: Applied Science and Manufacturing, 81, pp. 271 – 281, February 2016.

2015


Sockalingam, S., J. W. Gillespie, Jr., and M. Keefe, “Fiber Length Scale Modeling of Kevlar KM2 Yarn Subjected to Transverse Impact,” International Journal of Solids and Structures, Submitted June 2015.

Haque, B. Z., S. C. Chowdhury, and J. W. Gillespie, Jr., “Molecular Simulations of Stress Wave Propagation and Perforation of Graphene Sheets under Transverse Impact,” Carbon, Submitted November 2015.

Misumi, J., R. H. Ganesh, S. Sockalingam, and J. W. Gillespie, “Experimental Characterization of Tensile Properties of Epoxy Resin by Using Micro Fiber Specimens,” Journal of Reinforced Plastics and Composites, Submitted December 2015.

Sockalingam, S., J. W. Gillespie, Jr., S. Chowdhury, M. Keefe, “Recent Advances in Modeling and Experiments of Ballistic Fibrils, Fibers,

Yarns and Flexible Textile Fabrics – A Review,” Textile Research Journal, Submitted 2015.

Zhang, D., D. Heider, and J. W. Gillespie, Jr., “Determination of Void Statistics and Statistical Representative Volume Elements (SRVE) in Carbon Fiber Reinforced Thermoplastic Prepregs,” Journal of Thermoplastic Composite Materials, DOI: 10.1177/0892705715618002.

Tamrakar, S., Q. An, E. T. Thostenson, A. Rider, B. Z. Haque, and J. W. Gillespie, Jr., “Tailoring Interfacial Properties by Controlling Carbon Nanotube Coating Thickness on Glass Fibers using Electrophoretic Deposition,” American Chemical Society Applied Materials & Interfaces, DOI: 10.1021/acsami.5b10903; 8 (2) pp. 1501-1510, December 2015.

McDaniel, P. B., J. M. Deitzel, and J. W. Gillespie, Jr., “Structural Hierarchy and Surface Morphology of Highly Drawn Ultra High Molecular Weight Polyethylene Fibers Studied by Atomic Force Microscopy and Wide Angle X-Ray Diffraction,” Journal of Polymer Research, Accepted May 2015.

Abu Obaid, A., D. Heider, J. W. Gillespie, Jr., “Investigation of Electro-Mechanical Behavior of Carbon Nanotube Yarns during Tensile Loading,” Carbon, Accepted May 2015. http://www.sciencedirect.com/science/article/pii/S0008622315004984; http://dx.doi.org/10.1016/j.carbon.2015.05.091

Sockalingam, S., J. W. Gillespie, Jr., and M. Keefe, “Dynamic Modeling of Kevlar KM2 Single Fiber Subjected to Transverse Impact,” International Journal of Solids and Structures, Accepted May 2015, http://dx.doi.org/10.1016/j.ijsolstr.2015.04.031.

Chowdhury, S. C., S. R. Swenson, B. Z. Haque, and J. W. Gillespie, Jr., “Molecular Dynamics Simulations of Singe-walled Carbon Nanotube Bundle under Mechanical Loading,” FEATURE ARTICLE. SAMPE Journal, 51 (3), May/June 2015.

Gao, X., R. E. Jensen, W. Li, B. Z. (Gama) Haque, J. W. Gillespie, Jr., and S. H. McKnight, “Effect of Fiber Surface Texture on the

Mechanical Properties of Glass Fiber Reinforced Epoxy Composite,” Composites Part A, Pll: S1359-835X(15)00112-8 DOI: http://dx.doi.org/10.1016j.compositesa.2015.03.023.

Abu Obaid, A., S. Yarlagadda, and J. W. Gillespie, Jr., “Combined Effects of Kink Bands and Hygrothermal Conditioning on Tensile Strength of Polyarylate LCP and Aramid Fibers,” Journal of Composite Materials, DOI : 10.1177/0021998315574754, March 2015. 10.

Kelly, G. S., S. G. Advani, and J. W. Gillespie, Jr., “A Model to Describe Stick-slip Transition Time During Ultrasonic Consolidation,” International Journal of Advanced Manufacturing Technology, DOI 10.1007.s00170-015-6939-z, March 2015.

Nilakantan, G., R. L. Merrill, M. Keefe, J. W. Gillespie., Jr., and E. D. Wetzel, “Experimental Investigation of the Role of Frictional Yarn Pull-Out and Windowing on the Probabilistic Impact Response of Kevlar Fabrics,” Composites Part B, 68, pp. 215-229, 2015

2014


Sahin, O. S., Koellhoffer, S., J. W. Gillespie, Jr., Advani, S. G., and T. Bogetti. “Thermal Modeling During Continuous Ultrasonic Welding,” Turkish Journal of Engineering and Environmental Sciences, 38, pp. 79-96, November 21, 2014.

Sietins, J. M., J. W. Gillspie, Jr., and S. G. Advani, “Transmission Electron Microscopy of an Ultrasonically Consolidated Copper-Aluminum Interface,” Journal of Materials Research, 29, 17, doi: 10.1557/jmr.2014.176, 2014

Zangenberg, J., P. Brondsted, and J. W. Gillespie, Jr., “Fatigue Damage Propagation in Unidirectional Glass Fibre Reinforced Composites made of a Non-Crimp Fabric,” Journal of Composite Materials, doi 10.1177/0021998313502062, Sept. 13, 2013; 48 (22), pp. 2711-2727, August 2014.

McAllister, Q. P., J. W. Gillespie, Jr. and M. VanLandingham, “The Energy Dissipative Mechanisms of Particle-Fiber Interactions in a Textile Composite,” Journal of Composite Materials, DOI: 10.1177/0021998313511651, 2013.

Lopatnikov, S. L. and J. W. Gillespie, Jr., “Simple Analytical Model for Fiber Tensile Failure due to Droplet Impact,” J. Appl. Phys., DOI: 10.1063/1.4863207, 115 (6), Feb. 2014.

Dey, M., J. Deitzel, J. W. Gillespie, Jr., and S. Schweiger, “Influence of Sizing Formulations on Glass/Epoxy Interphase Properties,” Composites Part A, dx.doi.org/10.1016/j.compositesa.2014.04.006, 63, pp 59-67, 2014.

Sockalingam, S., J. W. Gillespie, Jr., and M. Keefe, “On the Transverse Compression Response of Kevlar KM2 using Fiber-level Finite Element Model,” International Journal of Solids and Structures, DOI: 10.1016/j.ijsolstr.2014.03.020; 51 (13) pp. 2504-2517, May 2014.

Kelly, G. S., M. S. Just, S. G. Advani, and J. W. Gillespie, Jr., “Energy and Bond Strength Development during Ultrasonic Consolidation,” Journal of Materials Processing Technology, Journal of Materials Processing Technology, 214, pp. 1665-1672, March 2014.

Chowdhury, S. C., B. Z. Haque, and J. W. Gillespie, Jr., “Molecular Simulations of the Carbon Nanotubes Intramolecular Junctions under Mechanical Loading,” Computational Materials Science, 82, pp. 503 – 509, Feb. 2014.

Sockalingam, S., M. Dey, J. W. Gillespie, Jr. and M. Keefe, “Finite Element Analysis of the Microdroplet Test Method using Cohesive Zone Model of the Fiber / Matrix Interface,” Composites Part A: Applied Science and Manufacturing doi.org/10.1016/j.compositesa.2013.10.021, 56 (2) pp. 239 – 247, Jan. 2014.

 

2010


 
Brunner D., Prasad A.K., Advani S.G., and Peticolas B.W., “A robust cell voltage monitoring system for analysis and diagnosis of fuel cell or battery systems,” Journal of Power Sources, Vol. 195, pp. 8006-8012, December 15, 2010. doi:10.1016/j.jpowsour.2010.06.054
 
Bubna P., Brunner D., Advani S.G., and Prasad A.K., “Prediction-based optimal power management in a fuel cell/battery plug-in hybrid vehicle,” Journal of Power Sources, Vol. 195, pp. 6699-6708, October 1, 2010. doi:10.1016/j.jpowsour.2010.04.008
 
Arisetty S., Krewer U., Advani S.G., and Prasad A.K., “Coupling of kinetic and mass transfer processes in direct-methanol fuel cells,” Journal of the Electrochemical Society, Vol. 157, pp. B1443-B1455, August 17, 2010. doi:10.1149/1.3478142
 
Bubna P., Brunner D., Gangloff J.J. Jr., Advani S.G., and Prasad A.K., “Analysis, operation, and maintenance of a fuel cell/battery series-hybrid bus for urban transit applications,” Journal of Power Sources, Vol. 195, pp. 3939-3949, June 15, 2010. doi:10.1016/j.jpowsour.2009.12.080
 
Spernjak D., Prasad A.K., and Advani S.G., “In situ comparison of water content and dynamics in parallel, single-serpentine, and interdigitated flow fields of polymer electrolyte membrane fuel cells,” Journal of Power Sources, Vol. 195, pp. 3553-3568, June 1, 2010. doi:10.1016/j.jpowsour.2009.12.031
 

2009


 
Zhang F.Y., Advani S.G., Prasad A.K., Boggs M.E., Sullivan S.P., and Beebe Jr. T.P., “Quantitative characterization of catalyst layer degradation in PEM fuel cells by X-ray photoelectron spectroscopy,” Electrochimica Acta, Vol. 54, pp. 4025-4030, June 30, 2009. doi:10.1016/j.electacta.2009.02.028
 
Krishnan P., Advani S.G., and Prasad A.K., “Thin-film CoB catalyst templates for the hydrolysis of NaBH4 solution for hydrogen generation,” Applied Catalysis B: Environmental, Vol. 86, pp. 137-144, February 23, 2009. doi:10.1016/j.apcatb.2008.08.005
 
Arisetty S., Jacob C.A., Prasad A.K., and Advani S.G., “Regulating methanol feed concentrations in direct methanol fuel cells using feedback from voltage measurements,” Journal of Power Sources, Vol. 187, pp. 415-421, February 15, 2009. doi:10.1016/j.jpowsour.2008.11.129
 

2008


 
Spernjak D., Advani S.G., and Prasad A.K., “Simultaneous neutron and optical imaging in PEM fuel cells,” Journal of the Electrochemical Society, Vol. 156, pp. B109-B117, November 10, 2008. doi:10.1149/1.3009585
 
Krishnan P., Advani S.G., and Prasad A.K., “Cobalt oxides as Co2B catalyst precursors for the hydrolysis of sodium borohydride solutions to generate hydrogen for PEM fuel cells,” International Journal of Hydrogen Energy, Vol. 33, pp. 7095-7102, November 12, 2008. doi:10.1016/j.ijhydene.2008.09.026
 
Weigert E.C., Arisetty S., Advani S.G., Prasad A.K., and Chen J.G., “Electrochemical evaluation of tungsten monocarbide (WC) and platinum-modified WC as alternative DMFC electrocatalysts,” Journal of New Materials for Electrochemical Systems, Vol. 11, pp. 243-251, October 2008.
 
Brown D., Alexander M., Brunner D., Advani S.G., and Prasad A.K., “Drive-train simulator for a fuel cell hybrid vehicle,” Journal of Power Sources, Vol. 183, pp. 275-281, August 15, 2008. doi:10.1016/j.jpowsour.2008.04.089
 
Arisetty S., Advani S.G., and Prasad A.K., “Methanol diffusion rates through the anode diffusion layer in direct methanol fuel cells from limiting current measurements,” Heat and Mass Transfer/Waerme- und Stoffuebertragung, Vol. 44, pp.1199-1206, August 2008. doi:10.1007/s00231-007-0355-3
 
Krishnan P., Yang T.H., Advani S.G., and Prasad A.K., “Rotating ring-disc electrode (RRDE) investigation of borohydride electro-oxidation,” Journal of Power Sources, Vol. 182, pp. 106-111, July 15, 2008. doi:10.1016/j.jpowsour.2008.03.064
 
Zhang F.Y., Advani S.G., and Prasad A.K., “Performance of a metallic gas diffusion layer for PEM fuel cells,” Journal of Power Sources, Vol. 176, pp. 293-298, January 21, 2008. doi:10.1016/j.jpowsour.2007.10.055
 

2007


 
Zhang F.Y., Spernjak D., Prasad A.K., and Advani S.G., “In situ characterization of the catalyst layer in a polymer electrolyte membrane fuel cell,” Journal of the Electrochemical Society, Vol. 154, pp. B1152-B1157, September 12, 2007. doi:10.1149/1.2777987
 
Spernjak D., Prasad A.K., and Advani S.G., “Experimental investigation of liquid water formation and transport in a transparent single-serpentine PEM fuel cell,” Journal of Power Sources, Vol. 170, pp. 334-344, August 2007. doi:10.1016/j.jpowsour.2007.04.020
 
Feser J.P., Prasad A.K., and Advani S.G., “Particle image velocimetry measurements in a model proton exchange membrane fuel cell,” Journal of Fuel Cell Science and Technology, Vol. 4, pp. 328-335, July 10, 2007. doi:10.1115/1.2744053
 
Arisetty S., Prasad A.K., and Advani S.G., “Metal foams as flow field and gas diffusion layer in direct methanol fuel cells,” Journal of Power Sources, Vol. 165, pp. 49-57, February 25, 2007. doi:10.1016/j.jpowsour.2006.12.008
 

2006


 
Feser J.P., Prasad A.K., and Advani S.G., “Experimental characterization of in-plane permeability of gas diffusion layers,” Journal of Power Sources, Vol. 162, pp. 1226-1231, November 22, 2006. doi:10.1016/j.jpowsour.2006.07.058
 
Zhang F.Y., Prasad A.K., and Advani S.G., “Investigation of a copper etching technique to fabricate metallic gas diffusion media,” Journal of Micromechanics and Microengineering, Vol. 16, pp. N23-N27, November 1, 2006. doi:10.1088/0960-1317/16/11/N02
 
Feser J.P., Prasad A.K., and Advani S.G., “On the relative influence of convection in serpentine flow fields of PEM fuel cells,” Journal of Power Sources, Vol. 161, pp. 404-412, October 20, 2006. doi:10.1016/j.jpowsour.2006.04.129